2001 MITUBISHI ECLIPS GT

  • Tiny
  • Dcronk
  • 2001 MITSUBISHI ECLIPSE
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 115,000 MILES

Engine runs great. 1. Idle is almost too low while in drive, but does not stall. 2. After replacing the EGR valve, check engine light came on but not for the EGR. 2. The code now is P0300 or "Random Misfire". Could these all be connected to a single problem?

Do you
have the same problem?
Yes
No
Wednesday, June 15th, 2011 AT 5:20 PM

1 Reply

  • Tiny
  • Rasmataz
  • MEMBER

Try cleaning out the idle air control valve and see what happens on the idle problem for P0300 its normally caused by vacuum leak and contaminated fuel

Was this
answer
helpful?
Yes
No
Wednesday, June 15th, 2011 AT 7:59 PM

Please login or register to post a reply.

Other EGR Valve Replace/Remove Questions