Changing sparkplugs on T&C V6

Tiny
BILL STARCK
  • MEMBER
  • 2001 CHRYSLER TOWN AND COUNTRY
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 125,000 MILES
Changing spark plugs on an '01 Town and Country v-6. Directions state "may have to remove firewall." Do they mean windshield cowl and how do I do this? I have 6 torx screws out of top of cowl. Do I need to take off windshield wipers too?
Do you
have the same problem?
Yes
No
Sunday, January 30th, 2011 AT 9:58 PM

2 Replies

Tiny
BLACKOP555
  • EXPERT
Take the wipers off. Take the upper plastic shields off of the area between the wipers then after thats off go under hood and disconnect the bolts and electrical wires on wiper motor and the linkages. Then pull out themotor and linkage as an assembly then you should have unlimited access to the plugs
Was this
answer
helpful?
Yes
No
Monday, January 31st, 2011 AT 2:29 AM
Tiny
BLACKOP555
  • EXPERT
The vowel has tabs on it that has to be pryed up after wipers and arms and torx.
Was this
answer
helpful?
Yes
No
Monday, January 31st, 2011 AT 2:32 AM

Please login or register to post a reply.

Recommended Guides