SPONSORED LINKS

Camshaft sensor

Tiny
JOYFIXER
  • MEMBER
  • 2001 CHEVROLET BLAZER
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 204,000 MILES
How does a person check a cam position sensor?
Friday, April 8th, 2011 AT 1:11 PM

11 Replies

Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
I'd start by checking ref voltage--ground--signal at the sensor. Any applicable trouble codes? What makes you think there is a problem with cam sensor?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 1:33 PM
Tiny
JOYFIXER
  • MEMBER
  • 9 POSTS
When I changed the distributor I forgot to plug in the electrical plug going to the distributor. My car started with a miss. Then remembering I did'nt plug it, I then pluged it in, and ther ws no difference in the way it ran, it still missed.
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 1:43 PM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Terminal c should be 12 volts, key on.
Terminal A is ground.
Terminal B is signal, dc pulse, on and off.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 1:54 PM
Tiny
JOYFIXER
  • MEMBER
  • 9 POSTS
Thanks JDL I will check volts and let you know the results. By the way I got codes P0200 & P341. Thanks again
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 2:05 PM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
The po341 is for your cam sensor. Was the vehicle missing, before you worked on the distributor?

The po200, says the computer didn't see correct voltage on command line. The command line is a ground. You could have an injector issue?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 2:28 PM
Tiny
JOYFIXER
  • MEMBER
  • 9 POSTS
Yes JDL that is what I was told, hopefully I dont have to go there. Thank again, you have been most helpfull.
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 2:51 PM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Let us know what you find.
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 3:58 PM
Tiny
JOYFIXER
  • MEMBER
  • 9 POSTS
JDL Problem solved, changed the cam sensor, don't have the miss I had before, have a slight miss but thats due to a plug wire or vacuum hose. Thank you all again so much. Joyfixer
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 4:02 PM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Glad you got it going your way.
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 4:14 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
Are you getting a P1345 code at all.
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 4:16 PM
Tiny
JOYFIXER
  • MEMBER
  • 9 POSTS
No I'am not getting any codes now.
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 4:18 PM

Please login or register to post a reply.

Related Camshaft Camshaft Sensor Content

Camshaft Angle Sensor Replacement P0015
VIDEO
Camshaft Angle Sensor Replacement P0015
Instructional repair video
VIEW MORE

Sponsored links