Fuel Filter Replacement
After making sure that the fuel pump and the fuel pressure regulator are OK, replace the fuel filter whenever fuel pressure drops below the specified value (320 - 370 kPa, 3.3 - 3.8 kgf/sq. Cm, 47 - 54 psi with the fuel pressure regulator vacuum hose disconnected and pinched).
Remove the fuel tank unit.
Remove the fuel filter (A).
Install the parts in the reverse order of removal with a new base gasket, then check these items:
When connecting the wire harness, make sure the connection is secure and the terminal (B) is firmly locked into place.
Check that the tab of the clamp (C) does not interfere with the wire harness.
Do not push the lower part of the suction filter (D).
When installing the fuel gauge sending unit (E), make sure the connection is secure and the connector is firmly locked into place. Be careful not to bend or twist it excessively.
Monday, November 29th, 2010 AT 2:41 AM