My fiance started her car this morning and was.

Tiny
ANONYMOUS
  • 2000 FORD CONTOUR
  • 154,000 MILES

My fiance started her car this morning and was sputtering and then shut off. Wouldnt start again so I hooked up code scanner to it and it read a code of cam position sensor so I replaced that part and now it still will not start. When it cranks over it is a pretty rough crank over im stuck on where else to go now.

Monday, January 28th, 2013 AT 11:21 PM

1 Reply

Tiny
ASEMASTER6371
  • EXPERT
  • 25,533 POSTS

Codes never identify bad parts, just failed systems.

Start with basics, compression, spark and fuel pressure.

My bet is possible timing belt failure

Roy

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Tuesday, January 29th, 2013 AT 11:52 AM

Please login or register to post a reply.

Related Camshaft Camshaft Position Sensor CMP Replace/Remove Questions

Help us by donating