Where is the schrader valve located for checking fuel pressure?

Tiny
JOE1953
  • 1999 NISSAN MAXIMA

I am about to check the fuel pressure, but can't located the schrader valve.

Do you
have the same problem?
Yes
No
Saturday, August 25th, 2012 AT 4:28 PM

11 Replies

Tiny
ASEMASTER6371
  • EXPERT
  • 25,533 POSTS

There is no schrader valve. You need to open the line at the fuel filter and use the correct adapters.

Roy

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Saturday, August 25th, 2012 AT 5:05 PM
Tiny
JOE1953
  • MEMBER

Thanks For Answer my Questions.

Was this
answer
helpful?
Yes
No
Saturday, August 25th, 2012 AT 5:20 PM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,533 POSTS

You still have issues?

Did you do a compression test?

I see you have no noid, but is there 12 volt power to one side of the injector?

Have been watching your postings and responses.

Roy

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Saturday, August 25th, 2012 AT 5:21 PM
Tiny
JOE1953
  • MEMBER

Do you mean a compression test on the cylinder or fuel pump? I use a noid light on the injector to check for pulse, the light didn't blink, I check for volt there is 12 volt.

Was this
answer
helpful?
Yes
No
Saturday, August 25th, 2012 AT 6:03 PM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,533 POSTS

Compression in all the cylinders.

With no noid, the computer grounds the injectors based on the input from the crank sensor. You did get a response to that and did you replace it?

Roy

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Saturday, August 25th, 2012 AT 6:17 PM
Tiny
JOE1953
  • MEMBER

No I haven't check the compression in all the cylinders neither replace the crank sensor yet.

Was this
answer
helpful?
Yes
No
Saturday, August 25th, 2012 AT 6:36 PM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,533 POSTS

Let us know

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Saturday, August 25th, 2012 AT 6:49 PM
Tiny
JOE1953
  • MEMBER

There is 12 volt power to one side of the injector but when I check the other side of the injector for pulse my test light do not blink.

Was this
answer
helpful?
Yes
No
Tuesday, August 28th, 2012 AT 3:28 AM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,533 POSTS

You already know this from your previous post. You need to check the crank sensor.

Roy

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Tuesday, August 28th, 2012 AT 3:30 AM
Tiny
JOE1953
  • MEMBER

I been trying to located the crank sensor haven't located it yet.

Was this
answer
helpful?
Yes
No
Tuesday, August 28th, 2012 AT 3:38 AM

Please login or register to post a reply.

Related Fuel System Pump Pressure Questions

Help us by donating