SPONSORED LINKS

P1569 vtcs solenoid valve circuit low input

Tiny
IRISHJESS
  • MEMBER
  • 2001 MAZDA PROTEGE
  • 130,000 MILES
What exactly is the purpose of this part, what is the most common cause, can I continue to drive the vehicle, any adverse effects if I do so? Seems to be running fine but the guy at the Mazda dealership I called didn't even know what it was, had to go ask someone else and then is spouting off dire circumstances.
SPONSORED LINKS
Tuesday, June 18th, 2013 AT 1:35 PM

10 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
This is for the intake runners

The Powertrain Control Module (PCM) monitors input voltages from Variable Tumble Control System (VTCS) solenoid valve. If voltage at is low when the VTCS solenoid valve OFF, PCM determines that VTCS solenoid valve has malfunction.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+2
Wednesday, June 19th, 2013 AT 6:15 AM
Tiny
JOSEMUSTANG
  • MEMBER
  • 3 POSTS
  • 2001 MAZDA PROTEGE
Four cylinder front wheel drive automatic 75,000 miles.

Does anyone know what this code means? I got it after going to Autozone and having scanned since I have the check engine light on solid for about three weeks, and off and on for about a month. I have changed spark plugs (10,000 miles on the plugs), cleaned the throttle body, regularly use 89 octane gas (Chevron), fairly new air filter (less than a year old=10,000 miles) Does anyone know how to fix it? Is it a time bomb?

Thanks,

Jose.
Was this
answer
helpful?
Yes
No
-1
Monday, January 6th, 2020 AT 6:05 PM (Merged)
Tiny
SLAVRENZ
  • MEMBER
  • 1 POST
This code means something is wrong with the connection between your VTCS solenoid and your PCM. VTCS is used to improve emissions at low rpm's. It basically restricts intake air so that the intake air speed increases and thus creates a greater mixing effect and better combustion.

The P1569 code means that either there is a problem with the wiring between the VTCS solenoid valve and the PCM, or that the VTCS or PCM is bad. Have a mechanic check the wiring between the two components for a short or an open circuit, and then check the solenoid and the PCM if the wiring looks good.

I do not think that driving with this problem would be an issue you might see lower gas mileage, but I do not know how much of an effect the VTCS solenoid has on increasing combustion at low rpms. Worst case scenario, you might get some unburned fuel passing through your engine, which might damage your exhaust system in the long run.
Was this
answer
helpful?
Yes
No
+23
Monday, January 6th, 2020 AT 6:05 PM (Merged)
Tiny
HSMITH7063
  • MEMBER
  • 2 POSTS
  • 1999 MAZDA PROTEGE
  • 30,000 MILES
Car passes emission test, but recurring P1569 problem prevents obtaining SMOG certification. Engine runs fine otherwise.
The solenoid vale operates if I jumper it, and all the vacuum hoses are good. How do I trouble shoot the system?
Was this
answer
helpful?
Yes
No
Monday, January 6th, 2020 AT 6:05 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Sounds like its a issue with circuit/wires connections or ecm.I need to know which engine you have to get you the correct trouble?Also do you have a multimeter to do some testing?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+3
Monday, January 6th, 2020 AT 6:05 PM (Merged)
Tiny
HSMITH7063
  • MEMBER
  • 2 POSTS
.6 engine (Protege LX) with auto. CA emissions. Yes, I have a multimeter.
Was this
answer
helpful?
Yes
No
+2
Monday, January 6th, 2020 AT 6:05 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
I got you the trouble tree for that code the pcm is behind the right side of the dash. Let know what you find.
Images (Click to make bigger)
Thumb
Thumb
Thumb
Was this
answer
helpful?
Yes
No
+2
Monday, January 6th, 2020 AT 6:05 PM (Merged)
Tiny
JOSEMUSTANG
  • MEMBER
  • 3 POSTS
  • 2001 MAZDA PROTEGE
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 75,000 MILES
Hi,

Does anyone know where is the VTCS & PCM located in the engine bay and what do they stand for? I want to see if I can replace, or troubleshoot without taking it to a shop since it seems pretty straight forward. I got the P1569 code from Autozone.

Thanks,

Jose.
Was this
answer
helpful?
Yes
No
Monday, January 6th, 2020 AT 6:05 PM (Merged)
Tiny
MERLIN2021
  • MECHANIC
  • 17,250 POSTS
PCM= Powertrain Control Module, or the main computer
VTCS=Variable Tumble control system P1569=low voltage. The best way to check it is to use a vacuum tester and see if it holds vacuum for 5 seconds, if not replace it, it's on the intake manifold.
Was this
answer
helpful?
Yes
No
Monday, January 6th, 2020 AT 6:05 PM (Merged)
Tiny
FMOSES22
  • MEMBER
  • 1 POST
It's the ground wire on back of engine missing out of harness the wiring in the harness y/l and br/v to connector and black wiring ground between them. I attached a new wire to the ground and clear code all good.
Was this
answer
helpful?
Yes
No
+3
Monday, February 22nd, 2021 AT 12:39 PM

Please login or register to post a reply.

Related P1569 Content

Sponsored links