SPONSORED LINKS

1999 XJ8 throttle body connection

Tiny
ISJEH061654
  • MEMBER
  • 1999 JAGUAR XJ8
  • V8
  • 2WD
  • AUTOMATIC
1999 xj8 throttle body pps/1/2 the wiring color connection from top to btm I have a manual but it has like -1 uw -2 bg help the connection broke and I don't know the order same on tps1/2. Help
Wednesday, March 9th, 2011 AT 8:34 PM

12 Replies

Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
Check the pic is this any help?
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, March 10th, 2011 AT 11:55 AM
Tiny
ISJEH061654
  • MEMBER
  • 24 POSTS
What are the numbers for. I put the wire on the way the colors are but when I push pedal very little power stabilty trac falsafe lights on help.
Was this
answer
helpful?
Yes
No
Thursday, March 10th, 2011 AT 9:06 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
The numbers are the pin connect reference numbers, now please tell me that you have not tried to open the throttle by hand. As this can seriously damage the throttle motor drive, if pins have come out of the plugs, they may be damaged as well, it is not just a matter of plugging them back in, the connections must be perfect as any high resistance will cause problems, what codes are you getting, and how did the problem start in the first place, did you damage the loom trying to unplug it?
Was this
answer
helpful?
Yes
No
Thursday, March 10th, 2011 AT 9:33 PM
Tiny
ISJEH061654
  • MEMBER
  • 24 POSTS
I replaced the throttle body gasket and the air filter and throttle air mask looks like turkey neck. I then tried to start it started and stopped so I thought one connection was connect right so when I took it back a loose the pps1/2 broke and I could not connect it any more so I slice another wire into eacd of the 4 pin keeping the colors as they where. P1000 0223 and stability tracs, and falsafe I cannot go over 25 mph
Was this
answer
helpful?
Yes
No
Thursday, March 10th, 2011 AT 11:14 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
The throttle position sensor is the cause of your problem I feel, the P0223 is a bad input signal from the TPI, the P1000 is not showing up in my data base, I would consider a replacement TPI.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, March 11th, 2011 AT 6:54 AM
Tiny
ISJEH061654
  • MEMBER
  • 24 POSTS
0k when I hooked up as my manual p uw r bg there is no code but p1000 but when I start car the rpm goes high I have to cut car off. Thanks and help.
Was this
answer
helpful?
Yes
No
Friday, March 11th, 2011 AT 1:50 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
High idle can be a tpi, throttle body, idle air control motor vacuum leaks, this will have to be check first hand by a qualified tech.
Was this
answer
helpful?
Yes
No
Friday, March 11th, 2011 AT 2:01 PM
Tiny
ISJEH061654
  • MEMBER
  • 24 POSTS
Thanks it only high when I hook the pps/1/2 with the wiring as in the way as the manual when hooking ur diagram it idles normal but has no power only 20 mph
Was this
answer
helpful?
Yes
No
Friday, March 11th, 2011 AT 8:37 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
I am thinking that the PPS will be damaged or sending a bad(high resistance) signal due to the wiring fault.
Was this
answer
helpful?
Yes
No
Friday, March 11th, 2011 AT 10:38 PM
Tiny
ISJEH061654
  • MEMBER
  • 24 POSTS
What you think is to replace pps or throttle body. Thanks
Was this
answer
helpful?
Yes
No
Saturday, March 12th, 2011 AT 12:17 AM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
If you can just do the PPS I would look into that
Was this
answer
helpful?
Yes
No
Saturday, March 12th, 2011 AT 12:21 AM
Tiny
ISJEH061654
  • MEMBER
  • 24 POSTS
Im looking seems hard to find as well as the connector for the pps. Thanks any help apreciated.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, March 12th, 2011 AT 1:28 AM

Please login or register to post a reply.

Related Throttle Body Content

Throttle Actuator Bore Service
GUIDE
Throttle Actuator Bore Service
The throttle bore or throttle actuator as they are called on newer cars is used to meter the engine air intake thus controlling the engine RPM and power output via the gas...
VIEW MORE

Sponsored links