I did a tune up plugs wires cap and rotor now it has a vibration I marked the wires and changed them one at a time any ideas?
have the same problem?
Saturday, November 13th, 2010 AT 2:58 PM
Did you have the issue before you did the work? Do you have spark at all the plugs, you could use a spark tester. You could try a cylinder balance test, kill cylinders one at a time, engine running. The cylinder that you kill that has the least effect on how the engine runs, is a dead or weak cylinder. If you kill spark, shouldn't do it for more than a second or so, may flood cylinder?