WHAT ARE POSSIBLE ISSUES FOR TURN SIGNALS AND FLASHERS NOT WORKING AFTER REPLACING MULTIFUNCTION SWITCH?

  • Tiny
  • Ronaroe
  • 1999 BUICK CENTURY
  • 10,000 MILES

1999 buick century, Turn signals quit working, checked fuses and ground wires, put in multifunction switch and it worked for 3 min. And quit. It will click but nothing comes on, no flashers. Could it be flasher relay or break in pink wire? If a break, can the whole wire be replaced?

Do you
have the same problem?
Yes
No
Monday, August 6th, 2012 AT 2:46 AM

1 Reply

  • Tiny
  • ImpalaSS
  • EXPERT
  • 3,147 POSTS

I would change the flasher relay. It may be getting hot and quit I would try that first. I wouldn't thing the wire is bad possible but I would try the relay first.

Was this
answer
helpful?
Yes
No
Monday, August 6th, 2012 AT 3:16 AM

Please login or register to post a reply.

Other Turn Signal Light Not Working Questions