SPONSORED LINKS

Crank Sensor replacement

Tiny
NORMANDALE BP
  • MEMBER
  • 1997 JEEP GRAND CHEROKEE
  • V8
  • 4WD
  • AUTOMATIC
Replacing crankshaft position sensor
Tuesday, January 25th, 2011 AT 4:32 PM

5 Replies

Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
5.2L and 5.9L Engine

The CKP sensor is bolted to the top of the cylinder block near the rear of the right cylinder head. Disengage the sensor wiring connector and remove the two sensor mounting bolts.
Carefully pull the sensor out of the cylinder block.
Installation is the reverse of removal.

See the diagram below for location
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+2
Wednesday, February 9th, 2011 AT 7:52 PM
Tiny
DN.PARKER
  • MEMBER
  • 1 POST
  • 1998 JEEP GRAND CHEROKEE
  • 6 CYL
  • AWD
  • AUTOMATIC
  • 170,000 MILES
How to replace defective crank shaft position sensor on a 1998 jeep grand cherokee limited.
Was this
answer
helpful?
Yes
No
-2
Monday, December 31st, 2018 AT 10:15 AM (Merged)
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Crankshaft Position Sensor

The crankshaft position sensor is mounted to the transmission bell housing at the left/rear side of the engine block. The sensor is adjustable and is attached with one bolt. A wire shield/router is attached to the sensor.

REMOVAL

Disconnect sensor pigtail harness (3-way connector) from main engine wiring harness. This connection is made near rear of distributor.
Remove sensor mounting bolt.
Remove wire shield and sensor
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
+5
Monday, December 31st, 2018 AT 10:15 AM (Merged)
Tiny
RUBETHOM
  • MEMBER
  • 1 POST
  • 1996 JEEP GRAND CHEROKEE
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 200,000 MILES
How do you change the crank sensor on the 1996 Jeep Grand Cherokee?
Was this
answer
helpful?
Yes
No
Monday, December 31st, 2018 AT 10:15 AM (Merged)
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Its simple-mark it before you remove it-
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Monday, December 31st, 2018 AT 10:15 AM (Merged)

Please login or register to post a reply.

Related Crankshaft Sensor Replace/Remove Content

Crankshaft Sensor Symptoms
GUIDE
Crankshaft Sensor Symptoms
Most modern car engines use a crankshaft sensor to monitor the engines crankshaft rotation. This sensor sends feedback information to the cars computer which then adjusts...
VIEW MORE

Sponsored links