BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
I have replaced wheel clinders calibers Master.
1997 FORD F-350
I have replaced wheel clinders calibers master and booster pedal hard when not running but when I start it the pedal creeps to the floor what can I do now
Friday, December 7th, 2012 AT 12:34 AM
Check to make sure the pushrod to the master isn't adjustable. If it isn't, it sounds like a bad master cylinder or a leak. Make sure rear brakes are properly adjusted too.
Friday, December 7th, 2012 AT 12:36 AM
to post a reply.
Related Brake Pedal Hard Content
1989 Ford F350 Can't Get Hard Pedal On Brakes
I Can't Get The Brakes To Bleed Properly. I've Replaced The Brake Booster, Master Cylinder (new-not Rebuilt), Vacuum Pump(it's A 7.3...
1997 Ford F350 Hard Pedal But No Panic Braking
Initially, Brake Pedal Was Getting Harder To Push And The Panic Braking Was Getting Less And Less. Replaced Booster, And It Made Pedal...
Replaced Master Cylinder & Booster Both Front Calipers & Rotors & Rear Wheel Cylinders On 1997 F350 Superduty, Bled The System, The Brakes...
Brake Pedal Goes To The Floor
Brakes Problem V8 Two Wheel Drive Automatic 275000 Miles Hello, I Have A 1989 F350, 2 Wheel Drive Dually, 460 Ci Gas Motor. I...
1995 Ford F350 Brake Pedel Easing To The Floor
Same As The Fellow With The 1992, I Clamped The Front Brake Lines Off And The Pedal Stays Hard, Blocked The Rear Lines Off And The Pedal...
Ask a Car Question. It's Free!
Steering Wheel Shakes
ABS Brake Warning Light On
How to Fix a Brake Pull
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.