BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
I just had the heads reworked not long ago and.
1997 DODGE RAM
I just had the heads reworked not long ago and head gaskets replaced I have also replaced the distributor and the coil. But at about 1200 rpm my truck shakes
Tuesday, February 19th, 2013 AT 10:48 PM
Start with basics, compression, fuel pressure. I would also look at the back pressure on the cat converters
Tuesday, February 19th, 2013 AT 11:46 PM
to post a reply.
Related Cylinder Head Gasket Replace/Remove Content
Changing Head Gasket
My Problem Is If I Remove The Cam Gear Tierap The Chain To The Gear Will The Cam Rotate And If It Does Is This Dangerous For The Valves
Just Replaced Head Gaskets And Timing Chain. Now...
Just Replaced Head Gaskets And Timing Chain. Now Engine Is Hard To Start And Barely Idles. No Trouble Codes. Motor Ran Fine Before Repair.
2004 Dodge Ram Resetting The Timing
Engine Mechanical Problem 2004 Dodge Ram V8 Two Wheel Drive Automatic 97000 Miles I Need A Procedure To Realign The Timing Of My Cams...
We Changed The Head Gasket On A 3500 Dodge Ram...
We Changed The Head Gasket On A 3500 Dodge Ram Deisel 5.9 What Cause The Oil To Mix With The Coolant When Engine Is Running
1997 Dodge Ram Engine Removal
Engine Mechanical Problem 1997 Dodge Ram V8 Two Wheel Drive Automatic 300000 Miles Hi I Was Just Wondering If It Was Possible To Remove...
Ask a Car Question. It's Free!
Coolant Mixing with Oil
Engine Oil Change and Filter
TPS Sensor Step by Step Replacement Guide
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.