Just replaced fuel pump resently but my fuel.

Tiny
JUNEC_NEV
  • 1997 CHEVROLET BLAZER
  • 200,000 MILES

Just replaced fuel pump resently but my fuel gage is still not working right, when the gas pedal was pressed and exceeds about 40 mph, or say gets a little warm. The needle on the gauge goes all the way down the full gas, way way down, I was thinkin if it is related to a some relay. And where it is located.

Do you
have the same problem?
Yes
No
Sunday, October 21st, 2012 AT 8:38 PM

2 Replies

Tiny
ASEMASTER6371
  • EXPERT
  • 25,533 POSTS

No, the sender is most likely the issue. Did you replace the entire module or just the pump?

Roy

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Sunday, October 21st, 2012 AT 9:48 PM
Tiny
JUNEC_NEV
  • MEMBER

It was a entire module, airtec brand. Did some wiring in it because the connector that comes with it is a inline, the old one is square. It got purple, gray and two black wires.

Was this
answer
helpful?
Yes
No
Tuesday, October 23rd, 2012 AT 1:22 AM

Please login or register to post a reply.

Related Fuel System Pump Location Questions

Help us by donating