how to adjust clutch on a 1996 subaru outback?
Jan 3, 2011 at 5:53 PM
clutch adjustment
1996 SUBARU OUTBACK
HOLMSKILL0007
- MEMBER
- 1 POST
- FOLLOW
Advertisement
Hello,
You must the clutch pedal to fork free play .12 - .16in see diagram. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Heres a guide that will help
https://www.2carpros.com/articles/how-to-replace-a-clutch
You must the clutch pedal to fork free play .12 - .16in see diagram. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Heres a guide that will help
https://www.2carpros.com/articles/how-to-replace-a-clutch
Image (Click to enlarge)
Jan 3, 2011 at 6:32 PM
i noticed that my clutch pedal didn't come all the way back out. the clutch was replaced appox. 3 years ago. it's a legacy outback wagon.
Feb 28, 2019 at 6:29 PM
(Merged)
Hi there,
you may have a leak in the hydraulic system, or if a mechanical clutch a binding cable. Check for any fluid loss at the slave or master cyl. If cable, disconnect cable at clutch end and see if it runs free.
mark (mhpautos)
you may have a leak in the hydraulic system, or if a mechanical clutch a binding cable. Check for any fluid loss at the slave or master cyl. If cable, disconnect cable at clutch end and see if it runs free.
mark (mhpautos)
Feb 28, 2019 at 6:29 PM
(Merged)
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.