CYLINDER NOT FIRING OR MISFIRING

  • Tiny
  • Mkirksy3
  • 1995 HONDA ACCORD
  • 97,000 MILES

I did the compression test and all the cylinders even the bad one was around 150PSi. The cylinder is still not firing or misfiring. I took the spark plug out and it was black on the end of it, the other spark plugs was kind of white. There is oil on the bottom of the distributor cap, but no oil inside. Not sure where that leak is coming from. I also changed the fuel injector on that one cylinder. When I first start the car, it idle fine until it heat up to normal temp. Not sure what else to do. Could it be a sensor or something. Maybe computer not responding. I dont know

Do you
have the same problem?
Yes
No
Monday, June 25th, 2012 AT 10:16 PM

1 Reply

  • Tiny
  • Rasmataz
  • MEMBER

Check injector, sparkplug and wire on that cylinder-Cylinder?

Was this
answer
helpful?
Yes
No
Monday, June 25th, 2012 AT 11:08 PM

Please login or register to post a reply.

Other Engine No Start Questions