BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Master Primary Cylinder
I changed the clutch Master cylinder and the.
1995 HONDA ACCORD
I changed the clutch master cylinder and the slave cylinder and I am getting little pressure on the clutch it does not sink all the way to the floor but it does not come all the way back up either.
Tuesday, January 29th, 2013 AT 5:10 PM
Most likely air still present put a tube tightly fit on bleeder fill with fluid to submerge hose open bleeder have helper pump pedal slowly till all bubbles gone
Tuesday, January 29th, 2013 AT 5:30 PM
to post a reply.
Related Transmission Clutch Master Primary Cylinder Replace/Remove Content
2002 Honda Accord
My 2002 Honda Accord Ex 5 Speed Will Not Drive. I Have Replaced The Clutch, Clutch Master Cylinder And Slave Cylinder. Please Help.
1998 Honda Accord Clutch Master Cylinder , And Slave...
Clutch Pedal Had No Pressure, And Changed The Slave Cylinder, And The Master Cylinder. Still No Pressure In The Pedal. Both Parts Brand...
1996 Honda Accord Clutch Master & Slave Cylinders
Both The Clutch Master And Slave Cylinders Are Seeping Fluid Externally. Are The Repair Kits Worth Doing With These Cylinders? Or Do...
1995 Honda Accord How Do I Bleed The Clutch Master...
How Do I Bleed The Clutch Master Cylinder
1993 Honda Accord Clutch Master Cylinder
I Put A New Master Cylinder In And Now I Cant Get Any Pressure On In The System, You Touch The Peddle And It Goes Right To The Floor. I...
Ask a Car Question. It's Free!
Code Read Retrieval/Clear
How to gather codes Ford Explorer
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.