95 Camaro clutch

Tiny
TERRYVANHERK
  • MEMBER
  • 1995 CHEVROLET CAMARO
  • V8
  • 2WD
  • MANUAL
  • 135,000 MILES
I have a chevy camaro 1995 z28, with six speed manual transmission. The forks hit the pressure plate on the clutch when I push the clutch pedal all the way to the bottom, I try to find the correct position of the forks but it always remains too far inside the housing it makes the fork very close to the pressure plate. Over time it is bent the hears of the throw out bearings. Already changed the clutch twice. What cause the forks remaining so low? It seems to be the only position it can hold. Thanks
Do you
have the same problem?
Yes
No
Sunday, November 14th, 2010 AT 6:09 PM

1 Reply

Tiny
HMAC300
  • EXPERT
The cutch fork is probably bent and needs replacing
Was this
answer
helpful?
Yes
No
Monday, November 15th, 2010 AT 2:34 AM

Please login or register to post a reply.

Recommended Guides