HALL EFFECT STATOR

  • Tiny
  • Monjomal
  • 1994 FORD RANGER
  • 6 CYL
  • 2WD
  • AUTOMATIC

How can you replace the hall effect stator without removing the distributor? The truck won't start. The fuel pump, fuel pump relay, ignition coil, and distributor cap have all been replaced and it's still not starting. We want to check the hall effect stator but don't want to remove the distributor if possible.

Do you
have the same problem?
Yes
No
Thursday, June 16th, 2011 AT 8:40 PM

2 Replies

  • Tiny
  • Rasmataz
  • MEMBER

Sounds like you're not getting spark.

The stator is in the distributor you measure its resistances and for a short to ground-you don't have to remove the distributor-

Was this
answer
helpful?
Yes
No
Thursday, June 16th, 2011 AT 8:47 PM
  • Tiny
  • CJ MEDEVAC
  • EXPERT
  • 9,504 POSTS

This may help

The Medic

Was this
answer
helpful?
Yes
No
Thursday, June 16th, 2011 AT 9:05 PM

Please login or register to post a reply.

Other Fuel System Pump Relay Questions