no start. no power to fuse 23(fuel pump). have power at fuel pump relay. replaced dme....no help.
Mar 17, 2013 at 11:26 AM
1994 BMW 540I
DCRAIG10004
- MEMBER
- 2 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
dme???? please explain
there should be 2 feeds to the relay. one is key on power and the other is 12 volts constant.
if there is no power to the fuse box fuse, then you may have a wiring issue at the fuse box or check fusible links
Roy
there should be 2 feeds to the relay. one is key on power and the other is 12 volts constant.
if there is no power to the fuse box fuse, then you may have a wiring issue at the fuse box or check fusible links
Roy
Mar 17, 2013 at 12:57 PM
Advertisement
The DME(bmw lingo) is the ECM. It was a bad CPS. During troubleshooting I inadvertantly had the fuel pump relay and engine control relay swapped, so it still wouldnt start. swapped them back and she fired right up. thanks
Mar 20, 2013 at 11:50 AM