1993 Cutlass Ciera.1&4 is firing. 5&2 and 6&3 is not firing. What do I need to do to get them to fire?

Tiny
JOURNEYOFAVIRGO
  • 1993 ALL OTHER MAKES RECREATIONAL VEHICLES

I just replaced the engine on a 1993 cutlass ciera s 3.3l.
1&4 is firing. 5&2 and 6&3 is not firing. What do I need to do to get them to fire?

Do you
have the same problem?
Yes
No
Saturday, June 16th, 2012 AT 6:44 PM

1 Reply

Tiny
RASMATAZ
  • MEMBER

Check and test the ICM, Coils and the CPS-if all good have the computer tested-

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, June 16th, 2012 AT 6:51 PM

Please login or register to post a reply.

Related Engine Not Starting Questions

No Start

I Have A 1996 Polaris Indy Xlt Touring That Will Not Start. Fuel Not Filling The Filter And It Is A Pull Start Therefore Has No Electric...
Asked by Jake Michael Soucie ·
3 ANSWERS
4 IMAGES
1996
ALL OTHER MAKES RECREATIONAL VEHICLES

1976 All Makes Recreational Vehicles Yamaha Gs300...

I Have A 1976 Yamaha Gs300 Snowmobile (one Cylinder, 2 Stroke). It Sat For About Seven Years (my Uncle Owned It And Gave It To Me Because...
Asked by olddodgetruck ·
1 ANSWER
1976
ALL OTHER MAKES RECREATIONAL VEHICLES

I Have A 1995 Passposrt That Wont Start. Dinostics...

I Have A 1995 Passposrt That Wont Start. Dinostics Shows Bad Egr. How Do I Kno For Sure
Asked by Anonymous ·
1 ANSWER
1995
ALL OTHER MAKES RECREATIONAL VEHICLES

2001 All Makes Recreational Vehicles Atv No...

Hello My Atv Will Idle Perfectly And Die When I Give It Gas. Like Something Is Restricting The Piston From Turning. Carb Is All Cleaned Up
Asked by Tmyhre11 ·
3 ANSWERS
2001
ALL OTHER MAKES RECREATIONAL VEHICLES

Recommended articles