HOW TO REPLACE THE FRONT LUG NUT STUDS ON 93 MITSUBISHI 3000GT

  • Tiny
  • teresakd3
  • 1993 Mitsubishi 3000GT

How to replace the front lug nut studs on 93 mitsubishi 3000gt

Saturday, July 14th, 2012 AT 9:53 PM

5 Answers

  • Tiny
  • ASEMaster6371
  • Expert
  • 25,550 posts

You must remove the wheel, disc caliper, caliper mount, rotor. Ten you will have acess to the stud. Hammer it out and you will have to use some big washers and a lug nut to act as a press to install it.

Roy

Was this
answer
helpful?
Yes
No
Saturday, July 14th, 2012 AT 10:00 PM
  • Tiny
  • teresakd3
  • Member

We removed all of that but there is nowhere for the stud to come out

Was this
answer
helpful?
Yes
No
Saturday, July 14th, 2012 AT 10:32 PM
  • Tiny
  • ASEMaster6371
  • Expert
  • 25,550 posts

You must remove the axle. Then the abs toner ring will unbolt from behind

Roy

Was this
answer
helpful?
Yes
No
Saturday, July 14th, 2012 AT 10:39 PM
  • Tiny
  • teresakd3
  • Member

How do you remove the axle?

Was this
answer
helpful?
Yes
No
Sunday, July 15th, 2012 AT 6:41 PM
  • Tiny
  • ASEMaster6371
  • Expert
  • 25,550 posts

Remove the nut and it should slide out of the hub. You will have to release the strut to get enough clearance for the nose of the ale to come out.

Roy

Was this
answer
helpful?
Yes
No
Sunday, July 15th, 2012 AT 8:10 PM

Please login or register to post a reply.

Similar Questions