SNAP ON SOLUS GETS NO COMMUNICATION WITH NEWLY REBUILT ECU

  • Tiny
  • dudewithstealth
  • 1992 Dodge Stealth
  • 150 miles

I have a 92 stealth rt, it starts and runs without the MAF plugged in but the idle is not smooth. With the MAF plugged in it will not start. Snap On Solus says there is no communication from the ECU, so I just had my ECU rebuilt and nothing changed. I still get no communication from the rebuilt ECU. If anyone has any ideas I would greatly appreciate hearing them, Thanks

Tuesday, October 18th, 2011 AT 1:01 AM

1 Answer

  • Tiny
  • rivermikerat
  • Expert
  • 6,118 posts

Check power and grounds. Check continuity between the MAF and the ECU.

Was this
answer
helpful?
Yes
No
Tuesday, October 18th, 2011 AT 3:42 AM

Please login or register to post a reply.

Similar Questions