HOW TO REPLACE A STARTER ON A 1992 CHEVY SCOTTSDALE 4X4 350

  • Tiny
  • Kat Schilke
  • 1992 Chevrolet Silverado
  • 230 miles

Need to replace starter on my truck. It is a Scottsdale there was NO DROP down for that style. How does one remove the starter?

Do you
have the same problem?
Yes
No
Monday, February 13th, 2012 AT 12:18 AM

1 Reply

  • Tiny
  • rasmataz
  • Member

REMOVAL & INSTALLATION

ALL EXCEPT "T" & "U" SERIES
NOTE:If shims are installed between starter and engine, note and record the arrangement for installation reference.

Disconnect negative battery cable. Raise and support vehicle. Remove starter braces and shields (if equipped). Disconnect electrical wiring from starter solenoid.
Remove starter mounting bolts. Remove shims and note arrangement for reassembly. Remove starter. To install, reverse removal procedure. Ensure shims are installed in original location. Tighten bolts or nuts to specifications.

Was this
answer
helpful?
Yes
No
Monday, February 13th, 2012 AT 12:24 AM

Please login or register to post a reply.

Similar Questions