BECOME A MEMBER
Sign up with Facebook
I AGREE TO THE
Login with Facebook
BECOME A MEMBER
I recently had the head gasket replaced because.
1991 PLYMOUTH ACCLAIM
I recently had the head gasket replaced because it needed it. And the belt tensioned to solve an overheating issue. Now it is overheating again and the heater is again blowing only cold air.
Wednesday, March 6th, 2013 AT 1:38 PM
You may have a air lock in your cooling system.
Monday, March 18th, 2013 AT 3:16 AM
to post a reply.
Other Cylinder Head Gasket Replace/Remove Questions
Replace Head Gasket
I Have A 88 Horizon 4cyl With 160k Miles On It. I Am Pretty Sure I Need A New Head Gasket. I Am A Widow With The Usual Tools And Have Done...
I Need To Time The Distributor To The Cam Shaft. How...
I Need To Time The Distributor To The Cam Shaft. How Do I Get The Distributor At Number 1 When The Cam Shaft Is At Top Dead Center On...
Car Starts But And Runs Descent But Once I Let My Foot...
Doesn't Even Try To Idle Should I Replace The Distributor Just Successfully Replaced The Timing Chain Thinking That This Was The...
1988 Plymouth Voyager Head Gasket Repair
Engine Cooling Problem 1988 Plymouth Voyager 6 Cyl Front Wheel Drive Automatic 88000 Miles I Have A Busted Head Gasket Can I Repair...
Related Cylinder Head Gasket Replace/Remove Questions
1992 Plymouth Acclaim My 1992 Plymouth Acclaim
1990 Plymouth Acclaim Head Gasket
1988 Plymouth Voyager Replacing Head Gasket
Ask a Car Question. It's Free!
Replacing Head Gasket
Blown Head Gasket Test
How to Fix Coolant in Your Engine Oil
Find a car manual for your car
© 1999 - 2016 2CarPros, Inc.