BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
1990 PONTIAC FIREBIRD
Gauges not working, have changed the fuse and took apart the dash. The lights on the gauge work but the gauges themselfs do not
have the same problem?
Friday, January 28th, 2011 AT 7:54 PM
Use a voltage tester at the gage fuse, should go hot with the key on. Feed comes from ignition switch. Not the gage fuse below.
Image (Click to enlarge)
Friday, January 28th, 2011 AT 8:51 PM
to post a reply.
Related Instrument Cluster Not Working Content
1999 Pontiac Firebird Total Electrical Shutdown
Phoenix, Az. My Firebird Hasn't Been Run For 2+ Years. New Battery Installed, But No Electrical Response To Key In Aux Or Ignition-start...
1995 Pontiac Firebird No Power To Guages
I Was Driving My 95 Ta When The Guages Started Jumping Around. A While Later I Smelled An Awful Smell. Right After That The Engine Started...
Cruise Control Can't Keep Up - Low Idle??
When I Set My Cruise Control It Tends To Have Trouble Holding The Set Speed, Esspecially When There's Even A Slight Uphill Slope. On Level...
What Would Cause The Headlights And Interior Lights To...
We Have Replaced The Headlight Switch And Checked The Fuse Box To See If Any Fuses Went Out. All Of The Fuses Are Good But An Entire Row Of...
The Vents On The Dash Do Not Put Out Any Air Or Heat.
Sandi Johnson Chermak
Ask a Car Question. It's Free!
How to Use a Test Light
Seat Switch Replacement
Find a car manual for your car
Terms & Conditions
© 1999 - 2018 2CarPros, Inc.