BECOME A MEMBER
Sign up with Facebook
I AGREE TO THE
Login with Facebook
BECOME A MEMBER
1990 Plymouth Acclaim head gasket
1990 PLYMOUTH ACCLAIM
Replacing head gasket cannot get to the bottom cover of timing belt what do I have take out to get to the bottom cover to relase the tention off the timing belt
have the same problem?
Tuesday, July 19th, 2011 AT 4:08 AM
Pull the vibration damper off. You might need a puller for that.
Tuesday, July 19th, 2011 AT 6:04 AM
to post a reply.
Other Cylinder Head Gasket Replace/Remove Questions
Replace Head Gasket
I Have A 88 Horizon 4cyl With 160k Miles On It. I Am Pretty Sure I Need A New Head Gasket. I Am A Widow With The Usual Tools And Have Done...
I Need To Time The Distributor To The Cam Shaft. How...
I Need To Time The Distributor To The Cam Shaft. How Do I Get The Distributor At Number 1 When The Cam Shaft Is At Top Dead Center On...
Car Starts But And Runs Descent But Once I Let My Foot...
Doesn't Even Try To Idle Should I Replace The Distributor Just Successfully Replaced The Timing Chain Thinking That This Was The...
1988 Plymouth Voyager Head Gasket Repair
Engine Cooling Problem 1988 Plymouth Voyager 6 Cyl Front Wheel Drive Automatic 88000 Miles I Have A Busted Head Gasket Can I Repair...
Related Cylinder Head Gasket Replace/Remove Questions
1992 Plymouth Acclaim My 1992 Plymouth Acclaim
I Recently Had The Head Gasket Replaced Because It Needed It...
1988 Plymouth Voyager Replacing Head Gasket
Ask a Car Question. It's Free!
Replacing Head Gasket
Blown Head Gasket Test
Coolant Mixing with Oil
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.