1990 Chevy Truck 1500 hydraulic clutch

Tiny
BETHEGROOVE
  • 1990 CHEVROLET TRUCK
  • 6 CYL
  • 4WD
  • MANUAL
  • 185,000 MILES

When I push in my clutch pedal, on 1990 GMC 1500, the clutch WILL disengage but then 'looses pressure' and clutch engages (while pedal is still on floor, in gear, tries to 'go'). Is this a symptom of the slave cylinder needing to bled or other?

SPONSORED LINKS
Do you
have the same problem?
Yes
No
Sunday, February 13th, 2011 AT 8:39 PM

1 Reply

Tiny
DOCFIXIT
  • EXPERT
  • 18,998 POSTS

Either slave or maste cylinder piston seal leaking

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, February 13th, 2011 AT 8:44 PM

Please login or register to post a reply.

Related Transmission Clutch Slave Secondary Cylinder Questions

I Replace My Cutch Slave But I Can Not Build Up...

I Replace My Cutch Slave But I Can Not Build Up Pressure On My Clutch
Asked by Anonymous ·
1 ANSWER
1990
CHEVROLET TRUCK

1995 Chevy Truck Clutch Problems

Drive Train Axles Bearings Problem 1995 Chevy Truck V8 Four Wheel Drive Manual 265000 Miles I Had A New Clutch And Rebuilt...
Asked by dwhaley64 ·
1 ANSWER
1995
CHEVROLET TRUCK

1991 Chevy Truck Problems With The Clutch

Transmission Problem 1991 Chevy Truck 6 Cyl Four Wheel Drive Manual I Went Out To Start My Truck One Morning And My Clutch Was Really...
Asked by Hazen85 ·
1 ANSWER
1991
CHEVROLET TRUCK

95 V6 Camaro, 3.4 Clutch Problems!

I Just Bought A 95 V6 3.4 Chevy Camaro With 113k Miles On It. I Was Told When I Bought It That It Needed A New Clutch, And I Wasn't Able...
Asked by VTownSuzieQ ·
1 ANSWER
1995
CHEVROLET TRUCK

Recommended articles