NEED SPECS ON VALVE ADJUSTMENTS

  • Tiny
  • tentaddict
  • 1988 Mitsubishi Mighty Max
  • 201,500 miles

Valve adjustments

Monday, February 13th, 2012 AT 2:45 PM

4 Answers

  • Tiny
  • rasmataz
  • Member

For what engine?

Was this
answer
helpful?
Yes
No
Monday, February 13th, 2012 AT 2:49 PM
  • Tiny
  • tentaddict
  • Member

It's a 4 cylinder 2.6l

Was this
answer
helpful?
Yes
No
Monday, February 13th, 2012 AT 2:59 PM
  • Tiny
  • rasmataz
  • Member

There's no listing for a 2.6 liter-

Was this
answer
helpful?
Yes
No
Monday, February 13th, 2012 AT 3:03 PM
  • Tiny
  • Wrenchtech
  • Expert
  • 19,584 posts

EXC. MODELS W/AUTO-LASH ADJUSTERS

Ensure engine is at normal operating temperature.
Position No. 1 cylinder at TDC of compression stroke to adjust intake valve Nos. 1 and 2 and exhaust valve Nos. 1 and 3. Loosen nut and adjust intake valves to.006 inch and exhaust valves to.010 inch.
Tighten nut. After nut has been tightened, ensure valve clearances are correct.
Position No. 4 cylinder to TDC of compression stroke to adjust intake valve Nos. 3 and 4 and exhaust valve Nos. 2 and 4. Loosen nut and adjust intake valves to.006 inch and exhaust valves to.010 inch.
Tighten nut. After nut has been tightened, ensure valve clearances are correct.

MODELS W/AUTO-LASH ADJUSTERS
Engines equipped with auto-lash adjusters do not require periodic adjustment.

Was this
answer
helpful?
Yes
No
Monday, February 13th, 2012 AT 4:18 PM

Please login or register to post a reply.

Similar Questions