BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
I just replaced the fuel pump and the fuel relay.
1988 DODGE RAM
I just replaced the fuel pump and the fuel relay and the truck still want start up, its still not gatting any gas to the carburator, but will hit or fire when I put gas in the carb. What next? THANKS!
Friday, October 26th, 2012 AT 11:55 AM
Check if the injectors are pulsing and also fuel pressure if its within specs-start here
HHC, 3/32 Inf 7th ID 79-80
Friday, October 26th, 2012 AT 12:00 PM
to post a reply.
Related Fuel System Fuel Pump Relay Content
1982 Dodge Ram Where's The Fuel Pump Relay?
Electrical Problem 1982 Dodge Ram V8 Four Wheel Drive Automatic I Have An Old Dodge Truck, It Hadn't Been Driven In Quite Some Time...
Fuel Pump Relay Fuse On '96 Ram 3500
I Am Not Sure Which Of The Relays Controls The Fuel Pump And Would Like To Test It. I Checked The Regular Smaller Fuses And Replaced One...
Asd Relay And Fuel Pump Relay
My Truck Won't Start. When I Turn The Key To Turn The Battery On The Two Relay Start Buzzing And Vibrating. So I Went And Purchased Two New...
Fuel Pump Relay Not Ingadging Fuel Pump On My 98 Dodge...
I Can Run A Hot Wire To Pump And It Works And I Can Ground The Relay And It Works I Have 2 Codes 1 Is Po 0443 Which Is Perg Controle Valve...
1999 Dodge Ram No Power To Fuel Pump
Started Truck To Warm Up, Shut Off After About 5 Min. Would Not Start Back, No Sound Of Fuel Pump Priminng. Could Not Find A Fuel Pump...
Ask a Car Question. It's Free!
How to fix an engine not starting
Engine Will Not Start
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.