BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
I took down the trans and replace the clucth and.
1987 MAZDA B2600
I took down the trans and replace the clucth and the pilot bearing and pressure plat and the pedal sit real low
have the same problem?
Friday, November 16th, 2012 AT 1:15 AM
Have you adjusted for free play and pedal height-also check return spring if its sprung-start here and then let me know
Friday, November 16th, 2012 AT 1:27 AM
to post a reply.
Related Transmission Clutch Pilot Bearing Replace/Remove Content
Clutch Pedal Sticking To Floorboard
My Clutch Petal Is Sticking To Floorboard It Started Yesterday I Bled The Lines By Pumping The Pedal And It Worked Most Of The Day Today But...
Clutch Pilot Bearing Replacement
A clutch pilot bearing is used to support the input shaft of the transmission. Replacing a pilot bearing should be included when replacing a clutch assembly which will help...
Clutch / Manual Transmission
My 1988 Mazda B2600, 4wd Has A Manual Transmission. When I Engage The Clutch Pedal, I Get A Grinding Of The Gears When Starting The Truck...
1993 Mazda B2600 Clutch Wont Shift, Sound Of Metal...
Transmission Problem 1993 Mazda B2600 4 Cyl Four Wheel Drive Manual I Have A 93 Mazda B2600i, Today My Truck Stalled Out At A Light...
1989 Mazda B2600 Clutch
My Truck's Clutch Pedal Has Begun To Stick To The Floor When In Gear And Requires Me To Put My Foot Under It While The Truck's Moving To...
Dislodged The Clutch Pivot Fork
I Have Changed The Slave Cylinder On The Clutch And Have Dislodged The Clutch Pivot Fork. Can I Fix This Without Removing The Bell Housing...
Ask a Car Question. It's Free!
Clutch Not Working
Throw out Bearing Replacement
Find a car manual for your car
Terms & Conditions
© 1999 - 2018 2CarPros, Inc.