Need help to fix my truck

Tiny
FISHHEAD1001
  • 1984 FORD F-150

I have a 1984 ford f 150 with a 4.9L 300 6 cylinder engine. It starts and runs good when started cold. After it gets to operating temperature it will die out and is hard to start. It will start after sitting a while and die out again. The distributor has been changed and the ignition module, plugs, plug wires, carburetor overhauled, radiator and thermostat, and the timing has been set. It still dies out in about ten to fifteen minutes of running. Catalytic converter has been by passed, cut out. A I R system is not connected either. Need help fast.

Do you
have the same problem?
Yes
No
Saturday, October 6th, 2012 AT 9:46 PM

1 Reply

Tiny
ASEMASTER6371
  • EXPERT
  • 25,554 POSTS

Check your fuel pressure when hot. It should be around 7 lbs.

Roy

Was this
answer
helpful?
Yes
No
Saturday, October 6th, 2012 AT 10:13 PM

Please login or register to post a reply.

Other Engine Extended Crank Questions