BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
1984 CHEVROLET CHEVETTE
84 chevette w/ overhead cam removed cam and manifolds trying to chg head gasket but it doesnt move do I have to take off springs and rocker arms ect/
have the same problem?
Wednesday, June 15th, 2011 AT 5:21 PM
Are all 10 head bolts removed? See diagram if yes then head is stuck. See if can find a spot to pry head up between block and head> BECAREFUL
Image (Click to enlarge)
Wednesday, June 15th, 2011 AT 5:34 PM
to post a reply.
Related Cylinder Head Gasket Content
Chevy 383 . 30 Over Bore Roller Cam Dart Heads Msd....
Has Always Over Heated Even When Stock ! It Has Fan Shroud Two Fans New Radio Thermostat Makes No Def Heads Ben Magnaflucksed Gaskets...
Blown Head Gasket Test
Got a blown head gasket? We are a team of ASE certified mechanics that have created this guide to help you check to see if your car's engine has a head gasket that is blown...
Head Bolt Torke
How Tight Should The Head Bolts Be On A 81 Chevette.
David in seattle
If You Rev Up Motor It Makes Noise Like A Bad Bearing And Oil Pressure Drops To 0#. When Motor Goes Back To Idle Speed Oil Pressure Goes...
I Have A 1983 Chevy Chevette With The Stock L4 1.6...
I Have A 1983 Chevy Chevette With The Stock L4 1.6 Sohc That's Never Been Touched I Am Needing The Standard Bore Size For This Engine...
Ask a Car Question. It's Free!
Coolant Mixing with Oil
Code Read Retrieval/Clear Scion XD
Oxygen Sensor Replacement
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.