BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Are the bolts holding the starter in place reverse or regular thred?
1983 FORD FAIRMONT
I am tring to replace the starter on my '83 fairmont and can not seem to loosen the bolts. I was wondering if they were reverse threaded or not?
have the same problem?
Wednesday, August 8th, 2012 AT 2:17 PM
No the bolts are standard thread! Spray some pb blaster on them and up into the threads and let it sit 30 minutes and come back and try again
Wednesday, August 8th, 2012 AT 2:25 PM
to post a reply.
Related Transmission Gear Reverse Content
I Have A 1982 Ford Fairmont, 6 Cyl, 200 Cu In. With...
I Have A 1982 Ford Fairmont, 6 Cyl, 200 Cu In. With An Automatic Transmission. The Reverse Gear Will Not Work At All When All The Forward...
My Car Is Leaking A Small Amount Of Oil When I Stop Or Reverse, A Line Of Oil Is Left And Sometimes Spots. I Own A 1998 Au Fairmont
1991 Ford Fairmont
The Problem Is Wen I Use The Blinkers All The Dash Light Turn On And Off And Muck Around And It Will Only Go In Reverse, 1st Gear And...
1996 Ford Fairmont Problem With Gear Change
The Cannot Change Gears. If Has Started Moving It Just Rev As I Hit The Accelerator Without Changing Gears As The Car Is Automatic. I Need...
1980 Ford Fairmont Modulator Valve
C4 Transmission When Changing Modulator Is There A Small Pin At The End Of It & If So Will It Come Out With The Valve Or Will It Run Out...
Ask a Car Question. It's Free!
Transmission Drain and Refill Kia Sportage
Transmission Service Toyota Tacoma
Transmission Service Ford Super Duty F-250
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.