BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
I have a serge in the carborator after has run a.
1981 CHEVROLET CORVETTE
I have a serge in the carborator after has run a few miles
Not a transmission slip and it dose not act as if it is going
To stall just drops in rpm's then surge? Any thought on
Where to start?
Image (Click to enlarge)
Wednesday, January 2nd, 2013 AT 3:48 PM
That shold have twin tbi units check for a blown gasket beneath both, spray choke cleaner and if rpm changes replace gasket.
Wednesday, January 2nd, 2013 AT 4:41 PM
to post a reply.
Related Transmission Slip Content
1979 Corvette Stingray Transmission Fluid Leak
Two Years Ago I Had To Move For Work And Couldn't Take My 1979 Corvette Stingray With Me So I Put It In Storage. Prior To Storage It Had No...
Transmission Not Shifting Into Overdrive At Normal...
On Steady Acceleration, Trans. Usually Shifts Into Overdrive At 45-48 Mph. Normal Rpm At 65 Mph In O/d Was About 1500. Currently, The...
2001 Chevrolet Corvette Grinding Gears While...
I've Been Wanting To Upgrade My Clutch For Some Time Now And I'm In The Process Of Choosing One With The Best Stock Pedal Feel, Max Hp...
1982 Chevy Corvette Noise Under Load
The Transmission In My 82 Vette Was Rebuilt Last Year. I Also Replaced The Engine And Tranny Mounts. When Going Up Grade And Car Has Shifted...
My 93 Corvette Is Having Shifting Problems. I Have...
My 93 Corvette Is Having Shifting Problems. I Have The 6 Speed Manual. Going From 1st To 2nd Gear Is The Problem. As I Go To Shift, The...
Ask a Car Question. It's Free!
Clutch Pilot Bearing Replacement
Throw out Bearing Replacement
Clutch Not Working
Find a car manual for your car
Terms & Conditions
© 1999 - 2018 2CarPros, Inc.