BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
I believe this is a crate engine
1968 FORD MUSTANG
I believe this is a crate engine. First I heard slight backfire, then something like tappet noise. What should I do to find problem. Oil pressure is good.
Wednesday, November 14th, 2012 AT 2:16 PM
Check tappets for adjust ment first then start car up andsee if all teh atppets go up an ddown the same, it could be lifter collapsing or something more.
Please consider a donation if we helped you
Wednesday, November 14th, 2012 AT 2:45 PM
to post a reply.
Related Camshaft Lifter Noise Questions
Does Adding Transmission Fluid To Engine Oil Help...
I Was Told To Stop The Lifters In My 97 Mustang Srs I Should Put Half A Bottle Of Transmission Fluid In With The Oil And Let It Run To Clean...
I Have A 1968 Mustang 289 Over Heat I Cchanged The Thermostat Belt And Water Pump But Still Over Heats The Fan Has 4 Blades
2000 Ford Mustang Oil Pressure Sensor
Engine Mechanical Problem 2000 Ford Mustang 6 Cyl Two Wheel Drive Automatic 149500 Miles I Have A 2000 Ford Mustang It Has Close To 149...
2004 Ford Mustang Camshaft Position Sensor
Electrical Problem 2004 Ford Mustang 6 Cyl Two Wheel Drive Automatic Whare Is The Camshaft Position Sensor And If Its Bad Could It...
Ask a Car Question. It's Free!
Camshaft Sensor Replacement
Camshaft Angle Sensor Replacement P0015
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.