Pitman Arm Questions

1993 Isuzu Other problem

Steering problem 1993 Other Isuzu Models 4 cyl Two Wheel Drive Manual 100000 miles We have a 1993 Isuzu, 2 wheel drive , pickup truck...

Asked by vickyc about 5 years ago - 0 Answers

1995 Mercury Other problem

Steering problem 1995 Other Mercury Models V8 Two Wheel Drive Automatic 140000 miles needtips on how to remove pitman arm

Asked by keffy07 about 5 years ago - 1 Answer

1997 Chevrolet Blazer problem

Suspension problem 1997 Chevy Blazer V6 Four Wheel Drive Automatic 127000 miles I replaced inner & outer tierods, (both sides) ...

Asked by RidinPimp89 about 5 years ago - 0 Answers

Lincoln towncar problem

1997 Lincoln Towncar 140,000 4.6 Car feels like it darts back and forth. Have changed all ball joints , idler arm and pitman arm. Have ...

Asked by Countrygirl22 about 5 years ago - 3 Answers

Steeriing box removal problem

1994 yukon 5.7L v8 2door 4wd i cannot remove the pitman arm and it is stuck on good, tried pb blaster, torching and also got the puller, ...

Asked by pulsti about 5 years ago - 0 Answers

Change pitman arm problem

I have a 1998 3/4 ton silverado 4x4 pickup. 200,000 miles, 2500series, 5.7 engine... I need instructions to remove and replace the pitman ...

Asked by npete55 about 5 years ago - 1 Answer

1999 Dodge Ram problem

My truck just passed 150,000 miles and from what I have read, these trucks are prone to wander and steering issues. My truck has ...

Asked by tibb77 about 5 years ago - 0 Answers

Really stuck pitman arm problem

I have a 94 yukon and am having trouble with removing the pitman arm. I removed the relay rod and idler arm and got a pitman arm puller but...

Asked by pulsti about 5 years ago - 1 Answer

Knockouts?? problem

I have this 94 GMC Yukon 5.7l v8 with a 4 inch lift and 33 inch super swampers. I think the lift and tires are taking a toll on my front end...

Asked by pulsti about 5 years ago - 0 Answers

Front end noise ford crown vic problem

I have a 91 ford crown vic w police package 5.0, auto trans. about 90,000 miles on it the problem is when im backing up slowly or pulling ...

Asked by marc77 about 5 years ago - 0 Answers

1989 BMW 325 problem

This car is old and needs alot of work. The vibration starts at 40 mph gets really strong at 50 mph then smooths out a little at 60mph. ...

Asked by rikj14 about 5 years ago - 6 Answers

1997 Chevrolet Blazer problem

There is excessive play in the steering wheel on our '97 Blazer 4x4. Idler arm, pitman arms are new. Alignment is good. Is there any ...

Asked by drewdal about 5 years ago - 3 Answers

1997 Chevrolet Silverado problem

I'm on my third steering box and pitman arm. The steering is so sloppy it's dangerous. I get such little improvement by changing the above ...

Asked by azjohnc about 5 years ago - 0 Answers

Steering gear leak problem

Hello. I have a 1995 Dodge Ram 1500 (4WD half ton) with a 360 (5.9 L) and 109,000 miles. There is a pretty bad fluid leak coming from my ...

Asked by martinez.129 about 5 years ago - 1 Answer

1990 Chevrolet Suburban problem

We use this to pull a 3 horse trailer. Problems all began with it just shutting off while driving 65mph. Replaced fuel pump. Blows fuse for ...

Asked by bwalsh about 5 years ago - 1 Answer

Relay arm removial problem

I have a 1999 chevy s-10 4.3 liter 2 wheel drive with 180,000 miles on it and I can't seem to get the relay arm off. I have removed both of ...

Asked by j see about 5 years ago - 1 Answer

Contorl arm problem

1999 Ford Taurus 3.0 DOHC engine. 128,000 miles. I am unable to get the lower ball joint out of the control arm Broke a pitman arm ...

Asked by Wabenoflyer about 5 years ago - 0 Answers

1988 Mercury Marquis problem

The car is a 1988 Mercury Grand Marquis Station Wagon in Saudi Arabia with 160,000 Kilometers on the clock. Gave it to the mechanic last ...

Asked by gopiqpp about 5 years ago - 0 Answers

Loose steering problem

Hi my name is shane and i have a 1999 chevy suburban 1500 2wd and a little while back the steering has become very loose. i can turn the ...

Asked by shane1989 about 5 years ago - 1 Answer

Loose steering problem

I have a 1995 Tahoe, automatic transmission, 5.7 L engine, 4 wd, 135k mileage. Recently, had the Pitman arm, inner tie rod ends, idler arm ...

Asked by 95tahoe about 5 years ago - 0 Answers

1935 Ford F-350 problem

I have a 2000 Ford F350 4x4 Dually 7.3 diesel with 90000 miles. It would shake violently when hitting a bump make horrible clanging ...

Asked by morethanluckfarm about 5 years ago - 3 Answers

1998 Chevrolet Tahoe problem

I have a 98 2-Dr. Tahoe 4x4 with 100,179 miles with a 5.7. The issue is that the steering when turning left was very tight (as if no power ...

Asked by Bowtie_GM3 about 5 years ago - 1 Answer

Steering problem problem

I have a 1998 Dodge Ram 1500 club cab 4x4 with 80,000 on a 5.9L 360 engine. After I bought it I noticed that it turns more to the left than...

Asked by bodyman817 about 5 years ago - 0 Answers

1993 Chevrolet Suburban problem

Power steering gearbox leaking at pitman arm. should i add stop leak or have it rebuilt. had just purchased 2 weeks ago and leak seems to ...

Asked by matthew_frisch about 5 years ago - 0 Answers

1998 Dodge Truck problem

I have a 98 Dodge Ram 1500, 2wd, 155,000 miles, 5.9 engine. I have been having issues with excessive play in the steering control on the ...

Asked by Joni about 5 years ago - 3 Answers

Front end clanking while turning problem

98 burb 4x4 5.7l 6inch pro comp lift 36inch BFG'S history replaced ALL tie rod ends, both pitmans and aligned problem is when you turn the...

Asked by gacoon about 5 years ago - 3 Answers

Pitman arm second opion problem

2001 gand marquis gs I had my car in the shop and I need a second opinion . 1. they showed me the pit man arm was lose (ball ...

Asked by pmyhal about 5 years ago - 1 Answer

Vibrating brakes problem

I have a 2000 Chevy Silverado, automatic transmission, 4-wheel drive, 178000 miles. I had a shake when braking so I replaced the front ...

Asked by ggw03 about 6 years ago - 5 Answers

1996 Chevrolet Blazer problem

I just brought my 1996 Chevy Blazer in for front end work. They replaced the upper and lower ball joints, wheel barrings and all the other ...

Asked by ss05401 about 6 years ago - 7 Answers

1993 Oldsmobile Other problem

I just replaced both front brake calibers,pads,idle arms and pitman arms but when i apply the brakes the front of the the suv begins to ...

Asked by mrrick69 about 6 years ago - 1 Answer

Front wheels locking when parking or turning wheel problem

Please give me some suggestions on my98 chevy blazer 6 cyclinder 4X4 with 94,000 miles. seems that the gas pedal now has a funny feel ( a ...

Asked by pamelap about 6 years ago - 1 Answer

Replacing pitman arm and idler arm problem

1998 Tahoe 4WD 5.7L 150K miles - I was told by the dealer I needed to replace the idler arm and lower ball joints on my Tahoe. I was ...

Asked by pastormike about 6 years ago - 1 Answer

1999 Chevrolet Tahoe problem

Have a shimmy in steering wheel at 35-45 all front end parts are tight and had align, and tires done what else can caust this problem.

Asked by jhoove about 6 years ago - 3 Answers

1990 Chevrolet Silverado problem

I took my '95 K1500 in for an alignment (truck pulls slightly to the right) I was told the idler arm, pitman arm, and left lower ball joint...

Asked by graveworks about 6 years ago - 2 Answers

1998 Chevrolet Truck problem

Engine is running great, i think, BUt it looks like the problem i have is that the steering wheel shakes when i drive the truck... some ...

Asked by marklory about 6 years ago - 4 Answers

1999 Chevrolet Tahoe problem

What should it cost to replace the idler and pitman arms on a 1999 Tahoe 1500 4 WD with 90,000 miles. It has a 5.3L V8

Asked by Pop about 6 years ago - 1 Answer

2004 Chevrolet Silverado problem

I have 2004 4wd silverado with a5.3 v8. The last time I had my front end alligned the steering wheel was about 35 degrees turned to the left...

Asked by tennj about 6 years ago - 3 Answers

"death shakes" problem

My car is a 1989 suzuki samurai, 1.3 liter engine with 55 000 miles. recently i have had violent shaking in the steering wheel and the ...

Asked by stefanie about 6 years ago - 1 Answer

1984 Ford Bronco problem

I have 84 bronco the steering is loose and sloppywhat can i due

Asked by gm about 6 years ago - 1 Answer

A couple of front end questions problem

I have a 91 Chevy K5 Blazer 4x4. I think my tie rod ends are bad, but I want another opinion. If I grab onto the tie rod, I can pivot it up ...

Asked by GM-guy82 about 6 years ago - 5 Answers

Need online info please problem

1989 ford ranger 2wd 2.3 liter 5speed ... i need step-by-step info and diagrams on replacing the pitman arm, including what tools i need... ...

Asked by allenfreerider4 about 6 years ago - 0 Answers

Steering problem

I have a 1992 s-10 blazer 4.3L 4x4. What is the best way to replace the pitman arm. Can I just loosen up the steering gearbox, or aam I ...

Asked by makintiresmoke about 6 years ago - 1 Answer

Pitman arm problem

I have a 1997 ford f-150 with about a 2inch lift,it is 2wd, i bought it this way, i have a terrible squeel in the front end , i am pretty ...

Asked by nevpowerjimmy about 6 years ago - 1 Answer

Idler arm & pitman arm problem

I recently replaced the idler arms & pitman arm on my 2000 Chevy K3500. Now the steering seems awfully tight. Could I have over ...

Asked by fyug3 about 6 years ago - 1 Answer

1998 Chevrolet Other problem

My steering seems to have a feeling like it is binding somewhat then seems to move suddenly. It doesnt do it all the time and only when I ...

Asked by jimmbo2942 about 6 years ago - 0 Answers

Noise problem

2003 GMC Sonoma ZR5 4X4, (89800 mi.) I have this whiring/roaring noise in the front end. it sounds something like a bad wheel baring. Mind ...

Asked by hosscollah about 6 years ago - 1 Answer

1994 Chevrolet Truck problem

Vehicle has 105,000 miles and wanders while driving,and turns to the left when braking. I have replaced the pitman arm, idler arm, steering ...

Asked by 25BEDFORD about 6 years ago - 0 Answers

Pitman arm removal problem

I have a dodge ram 1500 4x4 and i am tryiny to get the pitman arm off the drag link can anybody help????

Asked by dodge_baby about 6 years ago - 1 Answer

Steering questions need answered problem

My upper and lower ball joints need replaced badly on my 1994 GMC Yukon and the mechanic told me my pitman and my idler arm are both bad. My...

Asked by pulsti about 6 years ago - 1 Answer

Jerky steering problem

The steering wheel has been jerking especially on curves. One place has replaced the pitman arm a couple of times. It is still doing it. ...

Asked by wrapumup about 7 years ago - 3 Answers

Related Topics