Upper Control Arm Questions
- 2003 Lincoln Aviator Noise Problem with 97000 miles
- My Awd Lincoln Aviator 2003 makes a clunking sound when I turn left or right,I replaced both upper control arms and lower ball joints , a ...
- Asked by Jcsabay14 about 12 hours ago - 2 Answers
- 1996 Acura TL Engine Problem
- I have the inline slant 5 cylinder 2.5 l motor for my TL. Thr motor blew and i will be replacing it with another used 5 cylinder motor. My...
- Asked by dodge504ram about 19 hours ago - 1 Answer
- 1997 Chevrolet Cavalier Noise Problem with 180000 miles
- I have a 98 Chevrolet Cavalier 4.2L automatic. I have a constant thumping sound and vibration. It almost feels like the engine is rocking ...
- Asked by chandler74 about 1 day ago - 2 Answers
- 2001 Infiniti I30 Steering Problem with 175000 miles
- Just finished replacing all front suspension parts. Well not all, now need to replace rack and pinion bushings. Steering is tight but when I...
- Asked by DaveK24 about 2 days ago - 2 Answers
- 2001 Lincoln LS Body Problem with 150000 miles
- I'm trying to figure out why my one side of the car is lower at the from then the other side I think its upper control arm cause I shake ...
- Asked by thebigib about 8 days ago - 1 Answer
- 2002 GMC Sonoma Suspension Problem with 124000 miles
- I just got a used truck which was lowered before I bought it. When I went to look at it, the dealer raised it to stock. I was okay with that...
- Asked by peanutg13 about 25 days ago - 8 Answers
- 1993 Ford Explorer Suspension Problem with 350000 miles
- A couple months back my friend jumped his truck being a stupid teenager and now his front end is canted in very badly he took it to a ...
- Asked by redthink2 about 28 days ago - 4 Answers
- 1999 Dodge Intrepid Steering Problem
- .i have a 1999 dodge intrepid with steering issues. on passenger side with tie rod unhooked its hard to turn spindal. what is most likely ...
- Asked by jmh1968 about 1 month ago - 1 Answer
- 2001 Ford Escape Suspension Problem
- I have two parts to fix that hooks to passanger side back tire one part is a lower control arm what is the upper bar called
- Asked by (pending member) about 1 month ago - 1 Answer
- 2002 Chevrolet Silverado Electrical Problem with 254350 miles
- I get shocked whenever I get out of the truck, like static electricty. I replaced the failed alternator and the problem went away only to ...
- Asked by (pending member) about 1 month ago - 1 Answer
- 2001 Toyota Tundra Suspension Problem with 116000 miles
- I have a clunking noise in frount end suspention I think. I had lower ball joints, stabalizer links, rack&pinion,and new frame replaced....
- Asked by (pending member) about 2 months ago - 1 Answer
- 2005 Chevrolet Monte Carlo Noise Problem with 135000 miles
- Well when i stop and then go i here a clunk/poping sound from front end. it dont do it when turning but will once and a wile do it when ...
- Asked by mikeshade about 2 months ago - 2 Answers
- 2004 Ford Explorer Steering Problem with 120000 miles
- How to replace upper and lower ball joints
- Asked by (pending member) about 2 months ago - 1 Answer
- 1998 Jeep Wrangler Steering Problem with 180000 miles
- I have replaced everything that has to do with the powersteering unit on my jeep wrangler. It was ok for a couple of months but the problem ...
- Asked by (pending member) about 2 months ago - 3 Answers
- 1993 Ford Tempo Brakes Problem with 118000 miles
- What would cause my car to pull to right when braking hard? Had new brakes, rotors, calipers,pads, brake hose, both tie rods, 4 wheel ...
- Asked by (pending member) about 2 months ago - 3 Answers
- 1999 Ford Focus Suspension Problem with 160000 miles
- My ford focus 1999 failed its mot on rear suspension arm rubber rubber bush deteriorated resulting in excessive movement, what is the part I...
- Asked by (pending member) about 2 months ago - 1 Answer
- 2002 Oldsmobile Aurora with 180000 miles
- How do you remove the motor? Have been told it has to be removed from underneath.....is this true?
- Asked by (pending member) about 3 months ago - 2 Answers
- 1994 GMC Sierra with 218000 miles
- I have a popping noise somewhere in the front end. I can only here when i begin movement, either direction. I have replaced upper control ...
- Asked by (pending member) about 3 months ago - 0 Answers
- 2001 Dodge Durango Suspension Problem with 162000 miles
- Just had upper and lower ball joints control arm replaced tie end rods driver side calipers . now when i back up it fills like my front ...
- Asked by (pending member) about 3 months ago - 1 Answer
- 2006 Dodge Charger Suspension Problem with 40000 miles
- What would b the step by step procedure for changin the upper control arm bushings? O'
- Asked by moneysam about 3 months ago - 4 Answers
- 2006 Dodge Charger Suspension Problem with 40000 miles
- What would b the step by step procedure to change the upper control arm bushings on this car
- Asked by (pending member) about 3 months ago - 0 Answers
- 1993 Chevrolet Truck Repair Problem
- Yes I'm trying to install new ball joints on my 93 3500HD wrecker I can clearly see the ball joint body should I remove the A-arm or what ...
- Asked by (pending member) about 3 months ago - 1 Answer
- 1994 Chevrolet S-10 Suspension Problem with 124000 miles
- Replace lower ball joint
- Asked by (pending member) about 3 months ago - 1 Answer
- 2004 Jaguar XJR Suspension Problem with 117000 miles
- I bought recently the vehicle, I was told that all bushings are cracked and cannot be changed without changing the full lower arm, upper arm...
- Asked by Musbah about 3 months ago - 5 Answers
- 1993 Chevrolet Astro Drivetrain Problem
- How do you remove and install front axles and drive shafts
- Asked by (pending member) about 3 months ago - 1 Answer
- 2002 Ford Mustang Repair Problem with 67000 miles
- Need to install front struts but have never done it befoer. Can you give me instructions? Your help would be greatly appreciated. Thanks, ...
- Asked by (pending member) about 3 months ago - 1 Answer
- 1998 Ford Explorer Drivetrain Problem with 180000 miles
- We had the passenger side upper control arm replaced in sept 2012 and am now being told it needs replaced again. The people who replaced it ...
- Asked by lorettaholawayphillips about 3 months ago - 1 Answer
- 2002 Jaguar X-Type Tires Problem with 113000 miles
- My rear tires are bowing out and has wear on the inside of the tires so much that the metal wires are exposed. I was wondering what could ...
- Asked by Mcnabb515 about 3 months ago - 1 Answer
- 1992 Toyota Corolla Suspension Problem with 250000 miles
- How do you know if your shock or coil springs have gone bad
- Asked by (pending member) about 3 months ago - 1 Answer
- 2003 Ford Falcon Suspension Problem with 174956 miles
- A clucking noise from the rear drive occurs when taking off?
- Asked by Kraega about 4 months ago - 1 Answer
- 2004 Honda Element Suspension Problem with 40000 miles
- Sir. What is the part number of bushing (???????????) of Rear upper control arm (52390-SCV-A11) of Honda Element 2004 (not that wich is ...
- Asked by Rasl about 4 months ago - 0 Answers
- 1999 Chevrolet Blazer Repair Problem with 130000 miles
- I have the 4 push button 4wd on the inside of the truck i had went to push it into 4lo and i started smelling a burning smell so i replaced ...
- Asked by kspark12 about 4 months ago - 0 Answers
- 2003 Chevrolet Silverado with 91500 miles
- Is it possable for a newly installed upper ball joint to become unpressed from the upper control arm and break the snap ring causing the ...
- Asked by dodendawn about 4 months ago - 1 Answer
- 2003 Chevrolet Silverado Suspension Problem with 91500 miles
- Is it possible for a newly installed upper ball joint to become unpressed and break the snap ring causing the upper control arm to rest ...
- Asked by dodendawn about 4 months ago - 2 Answers
- 1997 Ford F-150 Steering Problem with 19700 miles
- What is the labor time to R & R lower ball joints ? and the upper control arms on this model as well 97 ford f150 2wd 6cly
- Asked by Lost Youth about 5 months ago - 0 Answers
- 1979 Ford F-150 Steering Problem with 150000 miles
- I've replaced all the ball joints, tie rod ends and the steering gear box because I had very loose steering. After all this, my steering is...
- Asked by (pending member) about 5 months ago - 1 Answer
- 1999 Oldsmobile Silhouette with 179239 miles
- How to remove rack and pininion
- Asked by (pending member) about 5 months ago - 1 Answer
- 2002 Mercury Mountaineer Drivetrain Problem with 117000 miles
- Hello, I have noticed on my mountaineer (AWD-V8-117k) that sometimes when I accelerate...mostly going 35 mph+ I get a "slight" jerk that ...
- Asked by mbullion about 5 months ago - 1 Answer
- 1994 Chevrolet Camaro with 80000 miles
- How to replace the blinker arm
- Asked by (pending member) about 5 months ago - 1 Answer
- 1972 Dodge Truck Suspension Problem
- My front tires rub a little. could I just get an old leaf spring and use it as an add a leaf?
- Asked by sparky1234 about 6 months ago - 6 Answers
- 1999 Ford Ranger Suspension Problem with 16000 miles
- I recently replaced the front upper ball joints and control arms. I am paranoid that the joint will seperate from the spindle. I tighened ...
- Asked by derek_fox1 about 6 months ago - 2 Answers
- 2000 Ford Explorer Repair Problem with 120000 miles
- I recently replaced the upper control arms and lower ball joints on the vehicle, along with the driver side cv axle and the passenger side ...
- Asked by jam311 about 6 months ago - 0 Answers
- 1997 Ford Thunderbird Drivetrain Problem with 240847 miles
- I recently had my upper control arm, ball joints on both sides, rack and pinion repaired.. After all of the repairs, I now have problems ...
- Asked by Saniya2008 about 6 months ago - 2 Answers
- 1997 Ford Thunderbird Drivetrain Problem with 240847 miles
- I just had the rack and penion, upper control arm and ball joints on both sides, repaired also the transmission gasket changed and not I ...
- Asked by Saniya2008 about 6 months ago - 2 Answers
- 1998 Ford Explorer Repair Problem with 227000 miles
- I replaced sway bar bushings, lower ball joints,upper control arm with ball joints, both cv joints, still have a clanging noise en when ...
- Asked by (pending member) about 6 months ago - 1 Answer
- 2006 Cadillac XLR Suspension Problem with 17150 miles
- How do i reprogram the suspension control module in a 2006 Cadillac XLR? The dealer told me i needed a new suspension control module in my ...
- Asked by (pending member) about 6 months ago - 1 Answer
- 2003 Holden Vectra Suspension Problem with 217000 miles
- Own holden vectra zc v6 3.2litre .....just speed over $5000 got back today...did timing belt..rotary...shocks..struts....rotors ...brakes......
- Asked by (pending member) about 6 months ago - 1 Answer
- 1998 Chevrolet Cavalier
- How does motor come out manual shift out the top or out the bottem?
- Asked by d.r about 6 months ago - 1 Answer
- 1994 Ford Bronco Suspension Problem with 138000 miles
- I have a 94 bronco and the tire sits slanted, if i remove the tire, the brakes and rotor all seem loose and move up and down, could you tell...
- Asked by jameskirkpatrick about 6 months ago - 14 Answers
- 1994 Toyota Camry Suspension Problem with 125000 miles
- I have been rebuilding a 1994 Toyota Camry LE. I finally got around to the bump when the car goes over as pothole and rebuilt the front ...
- Asked by (pending member) about 6 months ago - 2 Answers
Got a Car Question?
Automotive repair can be puzzling without the right information. Fortunately, 2Carpros was created to help people with everyday repair problems in mind. New systems are being introduced yearly, instruction is needed to complete a service or repair. We offer access to a panel of ASE and manufacturer specific certified mechanics that are dedicated to guide novices and experts alike in any repair. After a detailed question enters our system it's filtered to a specializing mechanic. Once the problem has been indentified our technician will respond with diagrams, instruction and any additional information required. 2Carpros is a completely FREE service. Our technicians are compensated through donations and advertising revenue.
Ask a QuestionNot Sure Where to Start?
Most car repair is basic and straight forward. Unfortunately auto related problems such as "electrical" and "engine performance" issues can be complicated. These styles of problems can create confusion which leads to unnecessary repairs. These mistakes not only consume resources they waste time as well. Having the correct instruction can pinpoint the malfunction while generating the proper repair procedure. Our first things to check section includes step by step "do it yourself" troubleshooting guides that offer video with illustrations showing hands on interaction while providing tips of the trade for a successful car repair.
First Things to Check