Idler Pulley Questions
- 1996 Acura TL Engine Problem
- I have the inline slant 5 cylinder 2.5 l motor for my TL. Thr motor blew and i will be replacing it with another used 5 cylinder motor. My...
- Asked by dodge504ram about 3 days ago - 1 Answer
- 1987 Jeep Cherokee Engine Problem with 215000 miles
- My 4.0 belt all the sudden started jumping one notch only on the harmonic balancer pulley , splitting the belt.. I reset it and it jumps one...
- Asked by joe clark about 4 days ago - 4 Answers
- 2006 Dodge Stratus Noise Problem with 73000 miles
- My 2006 Dodge Stratus has 73,000 miles on it and has an intermittent noise that I can’t identify, coming from somewhere in the engine ...
- Asked by Anndretti about 9 days ago - 1 Answer
- 2000 Ford Taurus Engine Problem with 160000 miles
- My husband disconnected the AC in the car and after that, for about a month I was hearing strange soft squealing/humming noises. The other ...
- Asked by bunnyetoes about 19 days ago - 3 Answers
- 2002 Fiat Punto Noise Problem with 74000 miles
- Basically, recently when i've been driving and been kept stationary for a while, (while in traffic, going through the towns) my car starts ...
- Asked by HayleyC1989 about 20 days ago - 1 Answer
- 2000 Ford Taurus Engine Problem with 135000 miles
- My radiator belt recently started squealing, i drove about 30 miles on the highway, and it quit.it started again today, it sounds worse when...
- Asked by nfish about 24 days ago - 3 Answers
- 1993 Honda Del Sol Engine Problem with 222000 miles
- Just replaced timing belt and water pump now the car is eating the timing belt
- Asked by booberriebeckers about 24 days ago - 1 Answer
- 2000 Kia Sportage Repair Problem with 122600 miles
- I bought a 2000 Kia Sportage EX a few days ago and the guy said it was running aweomse... and showed me a bill for repairs consisting of ...
- Asked by acalkins about 26 days ago - 1 Answer
- 2005 Mitsubishi Triton Engine Problem with 195000 miles
- The belt that drives the alternator moves across one rib and turns the belt that drives the power steering up side down. the belt that ...
- Asked by Sonsi7 about 29 days ago - 1 Answer
- 1998 Dodge Caravan Air_conditioner Problem with 200000 miles
- one side is flatter than the other. which side of the idler pulley faces the motor?
- Asked by alembic1 about 1 month ago - 1 Answer
- 2000 Daewoo Lanos Engine Problem with 110000 miles
- Changing the serpentine belt, need to know where the location of the belt tensioner is on a 2000 daewoo lanos with 110,000 miles
- Asked by davey77 about 1 month ago - 2 Answers
- 2008 Mercedes Benz C300 Engine Problem
- Changed the thermostat and replaced belt went for a test run and found part of the belt was shredded what could this be thank you
- Asked by (pending member) about 1 month ago - 1 Answer
- 1993 Chrysler Le Baron Electrical Problem with 150000 miles
- I have a 1993 Chrysler Le Baron Convertible with a 3.0L/V6 Engine. I bought this car last week and the second day I had it the serpentine ...
- Asked by (pending member) about 1 month ago - 1 Answer
- 2001 Plymouth Neon Steering Problem with 150 miles
- How do i replace the idler pulley? what tools do i need? How do i jack the engine up?
- Asked by (pending member) about 1 month ago - 1 Answer
- 2000 Mazda b3000 Engine Problem with 121754 miles
- Does it matter if i use a 3 inchin pulley idler or a 3great 1/2.
- Asked by Jsteid34 about 1 month ago - 1 Answer
- 1993 Dodge Dakota with 223000 miles
- How to change on idler pully
- Asked by (pending member) about 1 month ago - 1 Answer
- 2000 Infiniti Q45 Electrical Problem with 174000 miles
- Had all four belts replaced in October, but now I crunk up left work and my battery and brake light came on. By the time I got home looked ...
- Asked by (pending member) about 1 month ago - 1 Answer
- 1994 Mitsubishi 3000GT Engine Problem with 150000 miles
- How to install the timing belt?
- Asked by miguel34 about 1 month ago - 1 Answer
- 1996 Nissan Maxima Engine Problem with 185 miles
- I have a 1996 nissan maxima gle. I was told that i need tk replace a timing belt on the car after getting it. Anyone can help with the ...
- Asked by nissanboy about 1 month ago - 1 Answer
- 1998 Cadillac Deville Repair Problem with 120652 miles
- Where my idler pulley is located the bolt broke off i tried to drill the bolt out,but the drill shifted drilled another partial angle hole ...
- Asked by (pending member) about 1 month ago - 1 Answer
- 2000 Ford Fairmont Engine Problem with 180000 miles
- My ford falcon 2000 au made a screeching sound while I was driving it and then the serpentine belt snapped and one of the pulley type things...
- Asked by jarrelbeazley about 2 months ago - 4 Answers
- 2001 GMC Safari with 235000 miles
- How do I Change idler arms?
- Asked by (pending member) about 2 months ago - 1 Answer
- 2002 Ford Taurus Repair Problem with 50000 miles
- Is there anyway i can bypass the ac compressor with a shorter belt. its a 3.0 2v. i'm near broke till the first of the month and am trying ...
- Asked by bnursick about 2 months ago - 1 Answer
- 2001 Oldsmobile Silhouette Engine Problem with 131000 miles
- This van keeps slipping the serpentine belt off the crankcase pulley. When this happens, the van will still idle but the belt rides on the ...
- Asked by (pending member) about 2 months ago - 1 Answer
- 1997 Infiniti J30 Engine Problem with 180000 miles
- The center idler pulley was making a howling noise so I replaced and I noticed that the timing belt seemed loose. I got to the automatic ...
- Asked by frank fixing about 2 months ago - 1 Answer
- 2006 Ford Explorer Noise Problem with 80000 miles
- Car is making a chirping noise. Changed serpentein belt already. Any ideas?
- Asked by N8hain12 about 2 months ago - 1 Answer
- 1995 Honda Passport Engine Problem with 143000 miles
- I have a 1995 Honda Passport LX 3.2 liter V6 2WD. I recently bought the car and after Pep Boys put it on a lift for an oil change, found out...
- Asked by colleenmariecorman about 2 months ago - 8 Answers
- 2001 Ford Expedition Noise Problem with 160000 miles
- Changed 2 belts, and tension pully. Engine still chirping. It's not constant...sometimes it changes with the weather. Sounds worse at ...
- Asked by G848 about 2 months ago - 6 Answers
- 1997 Nissan Altima Repair Problem with 19000 miles
- Is the idler pulley for the air conditioning belt mounted on the compressor bracket?
- Asked by Dave DiM about 2 months ago - 1 Answer
- 1995 Ford F-150 Engine Problem with 157000 miles
- Serpentine belt starts to come off crank pulley has new tensioner power steering pump and pulley new idler
- Asked by scottcmeyla about 2 months ago - 1 Answer
- 2004 Opel Corsa Noise Problem with 176000 miles
- What can it be i hear a noise at the idler pulley at the v belt.
- Asked by (pending member) about 2 months ago - 0 Answers
- 2001 Chevrolet Blazer Noise Problem with 307 miles
- Back in november I got the transmission rebuilt,along with front brakes, starter, u joints, tensioner and serpentine belt all replaced. a ...
- Asked by ninaanne16*89 about 2 months ago - 1 Answer
- 2002 Suzuki Esteem Repair Problem with 144 miles
- Which pulley is hooked straight to motor up top right behind motor mount, I can't find a diagram anywhere. The one under the hood is gone ...
- Asked by rjkbrooks about 2 months ago - 1 Answer
- 1998 Dodge Caravan Engine Problem
- Hey I have a 1998 dodge caravan V6 3.0L. belt tensioner has been replaced 2 times in 5 months. I aligned everything and it still drifting ...
- Asked by chrissimms about 2 months ago - 1 Answer
- 2010 Hyundai Elantra with 16500 miles
- What i do have to remove to change the timing belt detail by detail please or if can you send me a graphic how to do it.
- Asked by (pending member) about 3 months ago - 1 Answer
- 2004 Hyundai Sonata Engine Problem with 44000 miles
- Had all the belts, water pump, crank seal, cam seal, idler bearings and tensioner replaced , now car vibrates terribly. Could the mechanic ...
- Asked by benrussell about 3 months ago - 4 Answers
- 2006 Kia Rio Noise Problem with 110000 miles
- Hi there. car is squeeling from front drive belts,replaced all three,still squeeling checked belt tension replaced idler pulley still ...
- Asked by clintbull about 3 months ago - 0 Answers
- 2000 Pontiac Grand Am Engine Problem with 115000 miles
- Hi, My belt keeps breaking on my Pontiac Grand Am GT V6 3.4L. I have replaced the following in order to fix it: Both idler pulleys, pulley ...
- Asked by (pending member) about 3 months ago - 0 Answers
- 1996 Geo Tracker Engine Problem with 130000 miles
- What is idler pulley torque specification?
- Asked by (pending member) about 3 months ago - 1 Answer
- 2000 Subaru Impreza with 176000 miles
- Where would i get the Drivebelt tension specifications ??
- Asked by (pending member) about 3 months ago - 1 Answer
- 2002 Ford Windstar with 162000 miles
- Ok so first let me explain what it is doing and what I have changed on this vehicle. My van is making a squealing noise when it gets louder ...
- Asked by brendarowlandmansfield about 3 months ago - 3 Answers
- 1992 Ford Explorer Engine Problem with 75000 miles
- The idler pulley is frozen, i replaced it and the new one does the same thing. all the parts seem to be ok.
- Asked by spiderjohn about 3 months ago - 0 Answers
- 1992 Ford Explorer Engine Problem with 75000 miles
- The idler pulley seems to be frozen, i replaced it and same problem w/new pulley
- Asked by spiderjohn about 3 months ago - 0 Answers
- 1986 Cadillac Fleetwood Noise Problem with 90323 miles
- Its making a bad sqeaking noise when running and i have put a new belt on it and it didnt stop and the fan isnt spinning fats enough to keep...
- Asked by clos7832 about 3 months ago - 2 Answers
- 1996 Cadillac Fleetwood Noise Problem with 90323 miles
- Its making a bad sqeaking noise when running and i have put a new belt on it and it didnt stop and the fan isnt spinning fats enough to keep...
- Asked by clos7832 about 3 months ago - 1 Answer
- 2005 GMC Envoy with 107532 miles
- We replaced idler pulley and it made the whining sound end, however, while idling today, it died. Restarted, but was wandering if it just ...
- Asked by (pending member) about 3 months ago - 1 Answer
- 2000 Dodge Dakota Repair Problem with 221000 miles
- Belt jumps off track power steering pump new, idler pulley is new
- Asked by (pending member) about 3 months ago - 1 Answer
- 1989 Ford Bronco with 200000 miles
- Need to replace the serpentine belt on my 1989 Ford Bronco, which tension bolt do I loosen to take the belt off and replace? Do I need to ...
- Asked by (pending member) about 3 months ago - 2 Answers
- 2005 Dodge Neon Steering Problem
- What tool do i need to take off idler pulley. bolt. on a 2005. dodge. neon. car
- Asked by (pending member) about 3 months ago - 0 Answers
- 2004 Hyundai Elantra
- Hi, recently a mechanic found a leak in my water pump. He fixed it, insurance paid him, it was all good. When I got it back, it was making a...
- Asked by (pending member) about 4 months ago - 2 Answers
Related Topics
Got a Car Question?
Automotive repair can be puzzling without the right information. Fortunately, 2Carpros was created to help people with everyday repair problems in mind. New systems are being introduced yearly, instruction is needed to complete a service or repair. We offer access to a panel of ASE and manufacturer specific certified mechanics that are dedicated to guide novices and experts alike in any repair. After a detailed question enters our system it's filtered to a specializing mechanic. Once the problem has been indentified our technician will respond with diagrams, instruction and any additional information required. 2Carpros is a completely FREE service. Our technicians are compensated through donations and advertising revenue.
Ask a QuestionNot Sure Where to Start?
Most car repair is basic and straight forward. Unfortunately auto related problems such as "electrical" and "engine performance" issues can be complicated. These styles of problems can create confusion which leads to unnecessary repairs. These mistakes not only consume resources they waste time as well. Having the correct instruction can pinpoint the malfunction while generating the proper repair procedure. Our first things to check section includes step by step "do it yourself" troubleshooting guides that offer video with illustrations showing hands on interaction while providing tips of the trade for a successful car repair.
First Things to Check