Head Bolts Questions

1995 Ford Mustang Engine Problem

I have a broken head bolt in a recessed hole in the block of a Ford 3.8L V6. The bolt broke off at the threads, so I can't use a shorter ...

Asked by Hellwarrior68 about 1 day ago - 1 Answer

1999 Chevrolet Monte Carlo Engine Problem with 150000 miles

Replaced head and intake gasgets.Had the heads done and they pulled all off the mounting bolts for the coil packs,idiler tensioner and put ...

Asked by scottvanrope about 3 days ago - 1 Answer

2003 Chevrolet Malibu Engine Problem with 173000 miles

If i have 2 diffrent lenght bolts for my cylender head where do they go, according to my auto manual it says i have 2 diffrent lenghts bolts...

Asked by army 1462 about 4 days ago - 1 Answer

1990 Honda Civic Engine Problem with 261366 miles

I changed thermostat, added stop leak to oil, put fuel injector cleaner in gas, put coolant in radiator and reserve tank, changed air filter...

Asked by gailnjill about 6 days ago - 3 Answers

2005 Chevrolet Optra Engine Problem with 100000 miles

Dear sir the pointer of heat goes up and the water comes out from the cover of the water tank i changed the thermostat .water tank ...

Asked by brashka21 about 8 days ago - 1 Answer

1990 Honda Civic Engine Problem with 261366 miles

Car has hesitation when accelerating, also has 2missing bolts on head, oil seem to be all over engine area, smell of coolant after you drive...

Asked by gailnjill about 8 days ago - 1 Answer

2006 Hyundai Tuscon Electrical Problem with 70000 miles

I recently purchased a used 2006 Hyundai Tucson. Initially, we had no problems. However, it seems that when I use the key-less entry/lock ...

Asked by fwk5015 about 10 days ago - 1 Answer

2007 GMC Canyon Brakes Problem with 76000 miles

How do I remove the front rotor on a 2007 GMC Canyon 4x4? I have removed the 6 bolts that hold the stud plate and the 4 bolts that hold the ...

Asked by Tbone53 about 12 days ago - 2 Answers

1998 Mitsubishi Eclipse Noise Problem with 249883 miles

I have a 1998 Mitsubishi eclipse gs it had a cylinder 3 misfire in it so I replaced spark plugs and wires and coil pack. So I finally had to...

Asked by hotrod1995 about 15 days ago - 3 Answers

2001 Chevrolet Malibu Engine Problem with 13700 miles

I bought a new set of bolts for a 3100. The agent told me that there was one special bolt that went in. It looks like a Pontiac bolt. The ...

Asked by PLCsHeadaches about 17 days ago - 1 Answer

2003 Toyota Rav4 Engine Problem with 144000 miles

I have a 2003 RAV 4. I am changing the head gasket which is a chore and I am down to the gasket itself. I got all 10 bolts off but the ...

Asked by kimloofe about 19 days ago - 6 Answers

1996 Chevrolet Monte Carlo Engine Problem with 149000 miles

Head Gasket Kit doesn't include the head bolts or exhaust pipe packing that may possibly required & needed to complete the head gasket ...

Asked by sara7373 about 20 days ago - 1 Answer

2000 Chevrolet S-10 Engine Problem with 95000 miles

Can you replace a camshaft in a 2.2l 2000 chevy s10 without pulling engine is so please tell me how?

Asked by bigbyrd4412 about 23 days ago - 3 Answers

1995 Toyota Corolla Repair Problem with 220000 miles

Hi. Doing my first valve cover gasket. Removing the old seals left some scratches and at least one small hole where metal was shaved off. I ...

Asked by Chris VC about 23 days ago - 15 Answers

2001 Jeep Cherokee Engine Problem with 180000 miles

So last week my Jeep Cherokee made a hole in the side of the block and it looked like someone bombarded the engine compartment on the driver...

Asked by Baston about 25 days ago - 1 Answer

2003 Mitsubishi Montero Engine Problem with 176000 miles

My car started leaking oil all over the engine yesterday. I took it to a reputable mechanic and they are telling me they need replace the ...

Asked by jphorton about 1 month ago - 1 Answer

1995 Subaru Legacy Repair Problem with 252000 miles

I have a 1995 subaru legacy with a overheating issue, radiator was flushed and burped and still overheats after 10 mins of driving it makes ...

Asked by bocard80 about 1 month ago - 3 Answers

1999 Acura Integra Heater Problem

Just shaved the head and addedt a thicker than normal gasket, the feels great but it overheats rapidly and the radiator is producing serious...

Asked by monchy149 about 1 month ago - 1 Answer

2004 Volvo XC90 Engine Problem with 150000 miles

I. have 04 volvo xc90 2.9L engine changing serpentine belt . there is no bolt head to loosen tension. How to I release tension?

Asked by (pending member) about 1 month ago - 1 Answer

2002 Volkswagen Eurovan Engine Problem with 80000 miles

I would like to change-out the spark plugs on my 2002 Eurovan, VR6, 4-valve. I managed to tilt the radiator forward to provide clearance ...

Asked by (pending member) about 1 month ago - 2 Answers

1998 Lexus GS 300 Engine Problem with 200000 miles

Head bolt torque spcifications and sequence

Asked by (pending member) about 1 month ago - 1 Answer

2008 Kia Rio Engine Problem with 75000 miles

I am replacing a cylinder head and needed to know if a 2010 hyundai accent head was compatible? According to car parts.com and various other...

Asked by sailorjt1985 about 1 month ago - 1 Answer

1994 Ford Escort Engine Problem with 180000 miles

I have a 1994 ford escort 1.9 l and I just changed the head gasket and there is still a coolant loss but its not leaking externally. There ...

Asked by (pending member) about 1 month ago - 1 Answer

2004 Peugeot Expert Engine Problem

Can you tell me the torque settings for the head bolts and cam on 2004 peugeot expert and the sequence thanks

Asked by de92 about 1 month ago - 1 Answer

1989 Ford Ranger Electrical Problem with 98000 miles

Battery draining . alternater tests great , starting problem after running ive put 4 starter and solonoids and new battery to no avail on ...

Asked by releasedbyaliens about 1 month ago - 1 Answer

1997 Volkswagen Jetta Engine Problem with 177000 miles

How do I get at the coolant pump pulley bolts to loosen them? and do I have to do that in order to remove the timing belt for a head gasket ...

Asked by dune23 about 1 month ago - 1 Answer

1996 Volkswagen Golf Engine Problem with 147 miles

Head bolts and cam shaft nuts torque settings

Asked by scott2020 about 1 month ago - 2 Answers

2003 Volkswagen Passat Brakes Problem with 146000 miles

So as of right now, when the engine is cold, the ABS light and the ESP light are off. Then, when I brake at speeds above 26mph its perfectly...

Asked by xpandrally about 1 month ago - 2 Answers

1987 Ford Courier Engine Problem with 67000 miles

Can ypu please tell me what the torque setting are for the cylinder head bolts many thanks

Asked by (pending member) about 1 month ago - 0 Answers

2008 Kia Picanto Engine Problem with 45786 miles

I want ask Kia picanto cylinder head bolt specs how many

Asked by (pending member) about 1 month ago - 1 Answer

2001 Hyundai Santa Fe Air_conditioner Problem with 168000 miles

Bolt worn from belt tensioner . Need to replace. How do i place bolts back

Asked by Bammher about 1 month ago - 1 Answer

1993 Geo Metro Engine Problem with 192000 miles

How do i cange the water pump

Asked by (pending member) about 1 month ago - 2 Answers

1997 Chevrolet Cavalier Engine Problem

What is the size of bolt used for the upper intake manifold bolts , they bolt to the head then to the intake ... need replacement bolts and ...

Asked by (pending member) about 1 month ago - 1 Answer

1996 Ford Crown Victoria Engine Problem

As i was puttin on the hhead bolt with the tork ranchh the tip of the bolt broke will the car still will be able to drive with a bolt ...

Asked by (pending member) about 1 month ago - 1 Answer

2004 Dodge Truck Engine Problem with 125000 miles

How to change gasket on valve covers?

Asked by (pending member) about 1 month ago - 1 Answer

1996 Nissan Maxima Engine Problem with 185 miles

I have a 1996 nissan maxima gle. I was told that i need tk replace a timing belt on the car after getting it. Anyone can help with the ...

Asked by nissanboy about 1 month ago - 1 Answer

1985 Toyota Pickup Engine Problem with 75000 miles

I am finishing doing my timing chain. Do I put grey silicone on the block side of the gasket only or both sides? What's the best way to get ...

Asked by PCMentor29 about 1 month ago - 5 Answers

1991 Volvo 740 Engine Problem with 170223 miles

Replacing the head, have the sequence order of head bolt removal and installation but no torque on how many ft lbs to tighten them, help ...

Asked by Jantzen001 about 1 month ago - 1 Answer

2004 Chrysler Town and Country Engine Problem with 150000 miles

What is the cylinder head bolt torque specs and the intake bolt torque specs for a 2004 town and country 3.8L

Asked by (pending member) about 1 month ago - 2 Answers

1999 Dodge Ram Engine Problem with 170000 miles

My 99 Dodge ram 5.9 has a really bad idle i have done the following plugs wires rotor and cap coil IAC tps injectors and fuel pump no check ...

Asked by hudson89 about 1 month ago - 7 Answers

1997 Honda CRV with 100000 miles

My hona was overheating had it fix by mach and he said aul block heat up and cant tighten bolts on head he retap and fix also change rings ...

Asked by (pending member) about 1 month ago - 1 Answer

1997 Ford F-150 Electrical Problem with 118234 miles

While drive and stopping at a red light the head lights and int lights flicker I had the alternator checked they said it was good but I'm ...

Asked by Jdial32 about 1 month ago - 4 Answers

2007 Suzuki Vitara Engine Problem with 50000 miles

1. Cylinder head Torque. 2. Main bearing torque 3. Con rod torque

Asked by chadpresiheadboywint about 2 months ago - 2 Answers

1991 Honda Civic Engine Problem with 285000 miles

My car has a d15b1 in it. i am working on replacing the head gasket but the head will not lift off. i have removed the the intake and ...

Asked by unther47129 about 2 months ago - 1 Answer

1984 Toyota Pickup with 200345 miles

How do you remove the head? done unhooked everything got the cam and timing removed except the bottom part. all i see left is a big star bit...

Asked by (pending member) about 2 months ago - 1 Answer

2001 Chevrolet Malibu Repair Problem with 140000 miles

Ichangedthe water pump on my01 malibu and a head busted off the bolt and is stuck in the housing... Cant get it out, how do I swap the ...

Asked by (pending member) about 2 months ago - 1 Answer

1991 Plymouth Voyager Electrical Problem with 120000 miles

How do you replace right front turn signal light?

Asked by (pending member) about 2 months ago - 1 Answer

2007 Kia Rio Tires Problem with 81000 miles

Just bought the car from a car lot. Took it in for an alignment and they say that I need a camber bolt due to the tires rubbing. I noticed ...

Asked by (pending member) about 2 months ago - 1 Answer

2000 Daewoo Leganza Engine Problem with 89000 miles

Recently had the head skimmed and all gasket's,cam seals replaced on my car and first time lifting bonnet i noticed a lot of oil on my ...

Asked by (pending member) about 2 months ago - 0 Answers

2002 Mitsubishi Mirage Engine Problem with 90000 miles

What are the step to replace the crankshaft sensor on the 1.5

Asked by (pending member) about 2 months ago - 1 Answer

Related Topics