Flexplate Questions
- 1982 GMC S15 Engine Problem
- I put a new starter on my truck. it started a few times and then it quit starting. and i could not stop the starter drive from striking the ...
- Asked by David Council about 1 month ago - 1 Answer
- 1997 Toyota Tacoma Drivetrain Problem with 110000 miles
- Time Required For Flexplate Replacement
- Asked by (pending member) about 1 month ago - 1 Answer
- 1998 Chevrolet S-10 Drivetrain Problem with 150 miles
- Wich way does a flexplate go on a 98 s10 truck 4.3 vortech automatic?
- Asked by (pending member) about 2 months ago - 0 Answers
- 1998 Chevrolet S-10 Engine Problem with 150000 miles
- Flexplate catches where bolts go into the tourkconveter on 98 s10 truck 4.3 vortech so how do i make them spin freely? i put a new flexplate...
- Asked by (pending member) about 2 months ago - 1 Answer
- 1962 Ford Ranchero Engine Problem
- I have a pretty simple question. The make and model above arent accurate, I have a 1957 ford 292 Y block that I shoe horned into a 1929 ...
- Asked by (pending member) about 2 months ago - 1 Answer
- 2002 Mitsubishi Pajero with 150000 miles
- Were can i find the torque convertor on my mitsubishi pajero 2800 turbo diesel automatic long weel base
- Asked by (pending member) about 3 months ago - 1 Answer
- 2005 Suzuki Omni Engine Problem
- Sir, we want to make a generator engine self start, which is single cylinder four stroke diesel engine. its power is 3.5KW at 1500rpm.. ...
- Asked by (pending member) about 3 months ago - 1 Answer
- 1985 Dodge Ram Engine Problem
- I drove to work yesterday morning and everything was fine but when I left work and tried starting my truck, it made the grinding noise ...
- Asked by (pending member) about 3 months ago - 1 Answer
- 1995 Ford E-Series Van Engine Problem with 200000 miles
- I just replaced the starter with a starter from the local parts store but the new starter won't engage the fly wheel. I had the new starter ...
- Asked by (pending member) about 3 months ago - 3 Answers
- 2002 Suzuki XL7 Drivetrain Problem with 140000 miles
- Had the rear main seal done where the flexplate had to be removed by a mechanic. Now the flexplate is broken in the middle. What could cause...
- Asked by boonie about 3 months ago - 1 Answer
- 2000 Dodge Intrepid Engine Problem with 130000 miles
- I am swapping a 2.7 engine from a running 2002 and put it in a 2000 2.7 and now the engine that ran in the other car has no spark cranks ...
- Asked by Wjeano24 about 4 months ago - 3 Answers
- 2002 Oldsmobile Aurora Repair Problem with 119000 miles
- I changed my starter and battery and when I try to start it all it does is make a whining noise. Why is that
- Asked by dhrumbasmith about 4 months ago - 1 Answer
- 2000 Ford F-150 Drivetrain Problem with 66000 miles
- How to remove transmission
- Asked by (pending member) about 4 months ago - 1 Answer
- 1998 Ford Expedition Drivetrain Problem with 220000 miles
- I replaced my transmission, starter and flexplate and the truck wouldn't start so it was shimmed but it's making a loud noise.what would it ...
- Asked by (pending member) about 5 months ago - 1 Answer
- 2005 Chrysler Town and Country with 191000 miles
- Have po016 code changed cam sensor still acts like it has a rev limiter can not aelarate .
- Asked by m1rk about 6 months ago - 1 Answer
- 2000 Chevrolet Optra Repair Problem
- Location of the crankshaft sensor on a 2000 chevolet tracker 2.0l 4wd
- Asked by (pending member) about 6 months ago - 1 Answer
- 1999 Jeep Grand Cherokee Electrical Problem with 190213 miles
- I have a 1999 Jeep Grand Cherokee 4.7L V8 and it is showing error code P0340 Camshaft Position Sensor Bank A - Circuit Malfunction. I have ...
- Asked by schmash about 6 months ago - 2 Answers
- 1994 Chevrolet Astro Noise Problem with 175000 miles
- Have replaced 3 starters, shimmed them to what I thought was good but after 4 or 5 startup's starter starts grinding bad. Would a starter ...
- Asked by hinson5 about 6 months ago - 1 Answer
- 1983 Chevrolet Camaro Repair Problem with 278000 miles
- I have the transmission ready for removal but i cant get it to budge i checked and double checked to make sure all the bolt are out so that ...
- Asked by jerry1799 about 6 months ago - 6 Answers
- 2000 Ford F-250 Drivetrain Problem with 200 miles
- I'm trying to replace my flexplate. ive undone evrything i can see, have a tranniejack under it but i cant get it to seperate from the motor...
- Asked by (pending member) about 7 months ago - 1 Answer
- 1997 GMC Safari Drivetrain Problem with 185000 miles
- I started hearing cracking noise and i ignore it for like a month untill my van did not whant to run no more i thought it was the flywheel ...
- Asked by (pending member) about 7 months ago - 2 Answers
- 2006 Honda Accord Noise Problem with 140000 miles
- I have a 2006 Honda Civic that I purchased with a blown head gasket, being that it was higher mileage car I replaced it with a used low ...
- Asked by blakeveatch about 7 months ago - 9 Answers
- 2005 Ford Ranger Engine Problem with 130000 miles
- I have a 2005 Ford Ranger with a 5 speed Automatic 5r55e 3.0 2wd. Stock transmission unit was giving me problems so i recently got a hold of...
- Asked by emilioarriaga about 8 months ago - 1 Answer
- 2007 Subaru Impreza Repair Problem with 85000 miles
- I am looking at buying a 2007 Subaru Impreza Wagon, manual transmission. The owner claims to have all service records and using CarFax I can...
- Asked by dunham416 about 8 months ago - 1 Answer
- 1991 Buick Lesabre Engine Problem
- How do I get access to the rear transaxle-to-engine bolts on a 1991 Buick Lesabre?
- Asked by Baker003 about 8 months ago - 1 Answer
- 2006 Chrysler 300 Drivetrain Problem with 3800 miles
- 2006 srt8 7.0 engine. It happend when I was racing on this day I heared a knocking sound at idle comming from front of the car it goes ...
- Asked by 426man about 9 months ago - 8 Answers
- 2002 Chrysler Sebring Engine Problem with 80000 miles
- As soon as I start my car I can hear the rattle but it gets much worse after it's been driven a bit. When I'm going highway speeds it seems ...
- Asked by LPP about 9 months ago - 7 Answers
- 1996 Chevrolet Suburban Noise Problem with 123000 miles
- When started truck will start clanking after it has run for about 10 seconds. when put in gear it will clank louder. the noise sounds like ...
- Asked by Dave779 about 10 months ago - 1 Answer
- 2006 Honda Civic Noise Problem with 160 miles
- I was at the end of a 20 mile trip and when i put the car into reverse it made a rattling noise. I then put it in drive and it made the same...
- Asked by bcorum about 10 months ago - 1 Answer
- 2006 Chevrolet Silverado Noise Problem with 75000 miles
- I have a 2006 chevy silverado 1500 4.3 v6. I had two check engine codes. The first one was for the oxygen sensor in bank 2. I replaced the ...
- Asked by U_Ryoung about 11 months ago - 1 Answer
- 1997 Chevrolet Blazer Drivetrain Problem with 180000 miles
- I have just installed a engine that has around 69,000 Miles on it. The blazer was driving when I pulled it into the shop and since I got the...
- Asked by Justin Santander about 1 year ago - 3 Answers
- 1995 Pontiac Sunfire problem with 100000 miles
- It make a grinding noise when started
- Asked by oldlady701 about 1 year ago - 1 Answer
- 2002 Mercury Cougar Drivetrain Problem with 150000 miles
- I have a 2002 mercury cougar i put another engine from a 2001 mercury cougar so i have 2001 engine 2002 transmission and i am leaking fluid ...
- Asked by liljshorty about 1 year ago - 7 Answers
- 1996 Chevrolet Silverado Engine Problem
- When going to start the truck it would only engage the starter but the flywheel will not turn and the truck will not start. had the starter ...
- Asked by adavilarsp about 1 year ago - 2 Answers
- 1990 Cadillac Fleetwood problem with 187900 miles
- I am replacing the oil pan gasket and oil pump. I have removed the screws, starter and loose the muffer. Still having problem removing it. ...
- Asked by adadams about 1 year ago - 3 Answers
- 1979 Chevrolet Truck Drivetrain Problem with 18000 miles
- I bought this truck last night and I think that it was in 4 wheel drive ( I had no idea), and the speedometer was off by about 8 mph meaning...
- Asked by blaze45 about 1 year ago - 7 Answers
- 1993 Honda Accord Electrical Problem with 258000 miles
- I have tryed everything to get this car to start changed everything sumtimes itll start and when it does it runs just fine was told i might ...
- Asked by sweet_v about 1 year ago - 6 Answers
- 1993 Honda Accord Engine Problem with 250000 miles
- Okay here we go i have a 93 accord lx tht for some reason is tearing up starters like 7 in the last 12 months n the problem seems to be ...
- Asked by vsasser about 1 year ago - 3 Answers
- 1993 Honda Accord Engine Problem with 247000 miles
- My accord seems to be going through ALOT of starters its been replace 6 times this will be 7....something is causing excesive wear on the ...
- Asked by vsasser about 1 year ago - 1 Answer
- 1970 Ford Mustang Engine Problem with 65000 miles
- Rebuilt tranny, jasper crate motor, remanufactured starter.
- Asked by boilermaker1988 about 1 year ago - 1 Answer
- 1998 Ford Explorer Engine Problem
- Transmission
- Asked by betty3838 about 1 year ago - 2 Answers
- 1993 Honda Accord Engine Problem with 250000 miles
- The theeth on mine look a lil worn but there are none missing or broken....but my car is going through starters 6 in the last year(thank ...
- Asked by vsasser about 1 year ago - 1 Answer
- 2000 Isuzu Trooper Repair Problem with 92534 miles
- I have broken 2 flex plates in a 2 month period could my torque converter be bad on the transmission or what can be causing this problem
- Asked by qk9 about 1 year ago - 1 Answer
- 2003 Chevrolet Silverado Drivetrain Problem with 124000 miles
- Starter been dragging for couple days, now has that tinging sound when stepping on gas pedal. Shift to neutral and sound almost goes away. ...
- Asked by jeffnindy about 1 year ago - 1 Answer
- 2007 Dodge Magnum problem with 79788 miles
- AFTER WE INSTALLED STARTER , IT SPINS BUT DOESNT ENGAGE INTO THE FLY WHEEL AND DOESNT TURN THE MOTOR OVER.
- Asked by ANT about 1 year ago - 1 Answer
- 1990 Ford F-150 problem with 178500 miles
- I have tried 4 new starters. they would work at first them stop. this last will not do anything. it is not lining up with the teehth of the ...
- Asked by dshelton8533 about 1 year ago - 2 Answers
- 1990 Nissan 240SX Repair Problem with 175000 miles
- The car runs, but the flexplate is making noises
- Asked by kryssiie about 1 year ago - 1 Answer
- 1989 Ford Ranger Engine Problem with 58000 miles
- Even after turning the engine off and removing the key, the starter continued to grind ... it went for approx 10 minutes then cut off ... i ...
- Asked by wmsonrebel about 1 year ago - 7 Answers
- 1985 Mazda RX7 Engine Problem
- Manul to automatic transmission swap./
- Asked by willie bailey about 1 year ago - 0 Answers
- 1994 Pontiac Firebird Engine Problem with 220000 miles
- Bad vibration that appears to be engine related. condition present while sitting still with engine at idle and worsens with higher rpms. ...
- Asked by biker/wrench about 1 year ago - 1 Answer
Related Topics
| Automatic Transmission | Flywheel | Torque Converter | |
| Crankshaft | Flywheel Cover | Transmission | |
| Engine | Starter | Wont Crank Over |
Got a Car Question?
Automotive repair can be puzzling without the right information. Fortunately, 2Carpros was created to help people with everyday repair problems in mind. New systems are being introduced yearly, instruction is needed to complete a service or repair. We offer access to a panel of ASE and manufacturer specific certified mechanics that are dedicated to guide novices and experts alike in any repair. After a detailed question enters our system it's filtered to a specializing mechanic. Once the problem has been indentified our technician will respond with diagrams, instruction and any additional information required. 2Carpros is a completely FREE service. Our technicians are compensated through donations and advertising revenue.
Ask a QuestionNot Sure Where to Start?
Most car repair is basic and straight forward. Unfortunately auto related problems such as "electrical" and "engine performance" issues can be complicated. These styles of problems can create confusion which leads to unnecessary repairs. These mistakes not only consume resources they waste time as well. Having the correct instruction can pinpoint the malfunction while generating the proper repair procedure. Our first things to check section includes step by step "do it yourself" troubleshooting guides that offer video with illustrations showing hands on interaction while providing tips of the trade for a successful car repair.
First Things to Check