Clutch Slave Questions

1998 Isuzu Rodeo Repair Problem with 123000 miles

My clutch pedal sticks to the floor. I have replaced the slave cylinder and clutch master cylinder checked the lines and bled the system. ...

Asked by sgarver88 about 7 days ago - 1 Answer

1999 Dodge Ram Drivetrain Problem with 158000 miles

The clutch will not engauge, it feel like there is no pressure behind to push the rod to engauge the clutch. Does the 1999 ram have the ...

Asked by patio123 about 12 days ago - 2 Answers

1994 Isuzu Trooper Noise Problem

The throwout beraring went out in my 1994 Isuzu Trooper so my husband replaced the clutch, after replacing the clutch the Trooper was makin ...

Asked by AdelynnsMom about 18 days ago - 1 Answer

1998 Dodge Ram Drivetrain Problem with 225000 miles

My clutch went out on my 98 Dodge Ram 2500 4WD the other day. I limped it home shifting like a big truck timing the shifts w/out the clutch...

Asked by runningneo about 19 days ago - 1 Answer

2000 Honda Accord Drivetrain Problem with 288000 miles

I have a 2000 Honda Accord with 2.2 vtec engine (f23a1). A couple days ago, my clutch started getting stuck to the floor. I can still shift ...

Asked by samdby about 21 days ago - 1 Answer

2007 Suzuki Forenza Repair Problem with 60000 miles

I want to replace my 07 suzuki forenza sedans hydraulic clutch and slave but i cant find a diagram or any kind of directions to the process ...

Asked by heyyou22 about 22 days ago - 1 Answer

1999 Ford Ka Repair Problem with 48000 miles

Hello, Ive recently bought a ford ka and Sometimes my clutch goes down far too easily when I go to change gear as if its slacking and ...

Asked by Kayleighnjessy about 26 days ago - 1 Answer

1990 Jeep YJ Electrical Problem with 300000 miles

There are no codes listed for that year jeep are their . since they don't have the plug under the dash . it had all new tuneup parts when i ...

Asked by jeep1990 about 29 days ago - 1 Answer

2005 Ford Ranger Drivetrain Problem with 80000 miles

HYDRAUKLIC CLUTCH LINE POPPED OUT OF THE TRANSMISSION SO I HAD TO REPLACE THE SLAVE CYLINDER AND CLUTCH FLUID LINE .....NOW THE CLUTCH IS ...

Asked by brianMATTILA about 29 days ago - 1 Answer

2000 Dodge Neon Drivetrain Problem with 120000 miles

My car has a 5-speed manual transmission. The clutch was just replaced and then, all of the sudden, it went out and won't engage. The pedal ...

Asked by Rbelcher11 about 1 month ago - 3 Answers

1987 Chevrolet S-10 Repair Problem with 322890 miles

Ive put in a new fork and slave cylinder and throw out bearing in my my 87 s10 and still have no pressure at all on pedal ive even tried ...

Asked by john pace 56 about 1 month ago - 1 Answer

1987 Chevrolet S-10 Drivetrain Problem with 322890 miles

Replaced throw out bearing fork and slave cyinder bleeded the line but no pedal at all

Asked by john pace 56 about 1 month ago - 1 Answer

1992 Isuzu Truck Engine Problem

While my brother was driving his clutch pedal went to floor wouldnt come back up was wondering what the problem might be,thank you

Asked by psjones1 about 1 month ago - 1 Answer

1988 Mazda b2600 Drivetrain Problem with 99000 miles

My 1988 Mazda B2600, 4WD has a manual transmission. When I engage the clutch pedal, I get a grinding of the gears when starting the truck ...

Asked by jah180 about 1 month ago - 1 Answer

1987 Chevrolet S-10 Repair Problem with 322890 miles

I have fluid to slave cylinder and it moves but dont engage the clutch to put it in gear

Asked by john pace 56 about 1 month ago - 1 Answer

1987 Chevrolet S-10 Repair Problem with 322890 miles

My 87 s10 is a 4 speed manual transmission and the problem i am having is the clutch pedal will not push down at all master cylinder tank is...

Asked by john pace 56 about 1 month ago - 1 Answer

1990 Chevrolet Cheyenne Noise Problem with 150000 miles

Hello, I have successfully replaced hydraulic clutch in my 1990 Chevy 1500 2wd 5.7 liter, 5-speed manual, my problem is when I try, to ...

Asked by chevycheyennepete about 1 month ago - 1 Answer

1999 Mazda Miata Brakes Problem with 174000 miles

My brake master cylinder is leaking. I can crank up the car, but the clutch pedal is so loose and goes all the way down to the floor. I can'...

Asked by sharonm about 1 month ago - 1 Answer

2007 Ford Mustang Drivetrain Problem with 60000 miles

My car shifts great ,the clutch and presure plate have been replaced at 50000 , but in traffic it becomes hard to get in gear. I have driven...

Asked by robbiezx7 about 1 month ago - 3 Answers

1997 Chevrolet S-10 Drivetrain Problem with 117000 miles

Pushed clutch in. Heard a pop. Clutch will not engage. Suspect slave cylinder over extended jamming throw out bearing into pressure plate. ...

Asked by Dominick Val about 1 month ago - 1 Answer

1997 Mazda Other Drivetrain Problem with 15000 miles

I cannot get into an gear once I have driven the vehicle for over 20 minutes. In the morning everything is fine but as soon as the engine ...

Asked by (pending member) about 1 month ago - 1 Answer

1997 Ford Ranger with 160 miles

The clutch will not push down at all to much preasher or stuck

Asked by (pending member) about 1 month ago - 1 Answer

1993 GMC Sierra Repair Problem

I have replaced the master cylinder and slave cylinder on the clutch and still no pedal pressure...any ideas?

Asked by (pending member) about 1 month ago - 1 Answer

2008 Suzuki Jimny Noise Problem with 165000 miles

When the clutch is depress a squeek is heard and i was wandering if the master cylinder rubbers need changing

Asked by (pending member) about 1 month ago - 1 Answer

1998 Chevrolet Truck Drivetrain Problem with 200000 miles

How do I remove the clutch slave cylinder? Do I need to pull tranny?

Asked by Aaron Wilson about 1 month ago - 1 Answer

2004 Hyundai Tiburon

I am trying to replace the clutch and I can not get the transmission to come loose of the motor. All bolts have been taken off

Asked by (pending member) about 1 month ago - 2 Answers

1999 Ford Escort with 15000 miles

I replaced full clutch kit and slave cylinder on 99 Ford Escort. Ran fine for a few days and then clutch went out. Slipping rea bad. I re...

Asked by Ron Roux about 1 month ago - 1 Answer

1998 Honda Civic Drivetrain Problem with 135000 miles

The clutch suddenly stopped working after being able to pump it up to work...what could it be?

Asked by kendrajonesstarling about 1 month ago - 1 Answer

2008 Fiat Ducato with 27000 miles

Why does clutch pedal. Not return after long. journey have replaced. Master slave, not wanting. To change slave if not the problem due to ...

Asked by (pending member) about 1 month ago - 1 Answer

1994 BMW 318i Drivetrain Problem with 131000 miles

When I drive the car for a long distance the clutch quits working can u help please

Asked by (pending member) about 1 month ago - 1 Answer

2004 Ford Ka with 99000 miles

My ka was nosiy and i had clutch and slave done but nosie still there and stiff gears now

Asked by billy/paul about 1 month ago - 5 Answers

1992 Chevrolet Silverado Drivetrain Problem with 14000 miles

So I just bought a 92 Chevy Silverado v6 2wd when I bought it the guy said clutch is out were gunna have it replaced Monday I said I do it ...

Asked by (pending member) about 1 month ago - 1 Answer

1995 Ford F-150 Drivetrain Problem with 215000 miles

HOW DO I START TO REPLACE THE CLUTCH SLAVE CYLINDER ON MY4.9 LITTER 5SPEED1995 ford f150? feels like the pedals not connected to anything.

Asked by (pending member) about 1 month ago - 1 Answer

2006 Mazda b2300 Drivetrain Problem with 109000 miles

Problems shifting the manual transmission have been getting progressively worse. Replaced the clutch and pressure plate 15months ago. ...

Asked by (pending member) about 1 month ago - 1 Answer

2006 Ford Fiesta Drivetrain Problem with 170000 miles

My car is a 1.6 [ Durateck] and clutch has failed - hydraulic fluid just runs out in street. Can this be repaired without removing engine...

Asked by (pending member) about 2 months ago - 1 Answer

2010 Kia Picanto Engine Problem with 110189 miles

My car doesent go into gear

Asked by (pending member) about 2 months ago - 1 Answer

1993 Ford Probe Drivetrain Problem with 202000 miles

I have very little pressure on my clutch pedal, there are no leaks anywhere.if I try to bleed it, it pulls the pedal to the floor.if I put ...

Asked by (pending member) about 2 months ago - 1 Answer

1989 Isuzu Other

We have new seals for the clutch master cylinder and a rebuild kit for the slave cylinder. But we don't have any schematics to make sure ...

Asked by nandaeschlerhauser about 2 months ago - 2 Answers

1985 Jeep Cherokee Drivetrain Problem with 80000 miles

Comprehensive clutch adjustment procedure Some one else has installed a new clutch master & slave cylinder. now the peddle only ...

Asked by (pending member) about 2 months ago - 1 Answer

1995 Ford Ranger Engine Problem with 17500 miles

What causes the engine to run lean on one side and then the other side, then run normal.This only started after a clutch slave cylinder was ...

Asked by (pending member) about 2 months ago - 1 Answer

2005 Hyundai Elantra Repair Problem with 120000 miles

I got a new transimission and clutch approximately 3 weeks ago, and yesterday my pedal was stuck to the floor and wouldn't shift to any ...

Asked by casetleberry about 2 months ago - 6 Answers

2002 Kia Spectra Repair Problem with 13340 miles

I had a brand new clutch put in now my clutch peddle stays. Dowñ to the floor and where the brake fluid go s gets empty after pressing the ...

Asked by (pending member) about 2 months ago - 1 Answer

1983 Mazda RX7 Drivetrain Problem with 80000 miles

Hi I gave a 83 rx7 gs and I just got it running it was sitting. for 5 years and I drove it for a day and I parked it cuz the clutch would ...

Asked by (pending member) about 2 months ago - 7 Answers

1994 Honda Civic Engine Problem with 19400 miles

I have a Honda '94 EG6 Hatchback with a LS/VTEC swap and a GSR tranny, my clutch feels like its still stuck after I take it out, but I ...

Asked by (pending member) about 2 months ago - 1 Answer

2000 Chevrolet Cavalier with 100 miles

Changed the slave cylinder in my 2000 chevy cavalier 2.2 tried the clutch and when the clutch peadel is down it goes let it out and it stop

Asked by (pending member) about 2 months ago - 1 Answer

2004 Volkswagen Polo Engine Problem with 187658 miles

Hi my name is Calbi ,I have a Polo manuel that recently pops up his service ligths and I'm 80km over the service time now it just swith off ...

Asked by kaydo about 2 months ago - 8 Answers

1992 Toyota Paseo Repair Problem with 120000 miles

I'm having a problem with my transmission. It might not even the tranny, but the clutch itself. It is a manual tranny as you can already ...

Asked by alfredperry28 about 2 months ago - 0 Answers

1992 Nissan Pathfinder Electrical Problem with 430000 miles

I replace my slave clutch cylinder and hose assemble. we bled the system right. clutch paddle has good compression . clutch fork travels ...

Asked by heribertolongoria@live.om about 2 months ago - 1 Answer

1993 Jeep Cherokee with 150000 miles

How to adjust free play in clutch with slave cyl.

Asked by pulpo about 2 months ago - 1 Answer

1998 Chevrolet S-10 with 231000 miles

The clutch did not release good when it warmed i replaced the clutch assy with a NAPA premium assy i also replaced the slave cyl .the ...

Asked by (pending member) about 2 months ago - 1 Answer

Related Topics