Clutch Master Questions

1997 Saturn Other problem

How do i bleed the ckutch for a 1997 Saturn

Asked by sweets about 6 years ago - 1 Answer

1984 Ford Windstar problem

I am restoring a 84 528e. I have replaced the battery, battery cables, and the starter. When I pulled this car in the clutch worked fine. ...

Asked by thandyman about 6 years ago - 1 Answer

Clutch master cylinder problem

1994 Ford Explorer 4x4 sport: Where is the clutch master cylinder located, how can you tell if it is bad, and if bad, how do you replace it...

Asked by average at best mechanic about 6 years ago - 1 Answer

2010 Chevrolet S-10 problem

Hi Guys! I have a demonized 2000 S-10 (95K miles), 4.3L with an intermittent hyd. clutch problem. At times, the problem is so bad that I ...

Asked by gabesplace about 6 years ago - 1 Answer

1996 All Other Makes All Other Models problem

I have a 96 tracker with 136.000Ks.My problem is when I put my clutch in the rpm drops to 0 then stalls it does that every time i come to a ...

Asked by chevynut about 6 years ago - 4 Answers

2012 Mazda Truck problem

Clutch sticks all the way to the floor when stopped for a while at light. There is a master and slave clutch cylinder. Is there a spring...

Asked by sfalk about 6 years ago - 1 Answer

Shifting problems problem

I own a 1997 K1500 4X4 Chevrolet Truck 71,000 Miles,with a manual transmission. My problem is I recently had the Master cylinder replaced...

Asked by mjmmchevy about 6 years ago - 1 Answer

Camaro problem

Is it possible to swap a 305 5.0 tbi 5 speed from a 91 rs to a 95 camaro body that is an automatic?

Asked by ralleyegirl about 7 years ago - 4 Answers

Ford focus clutch question? pleaase help ! problem

My main dealer (UK) has replaced my slave cylinder and master cylinder and clutch and all the rest (screws fliuid etc) 8 months ago. On my ...

Asked by kennewby about 7 years ago - 1 Answer

1991 Ford Escort problem

I can't get the darn thing to change gears. The clutch goes all the way in and I don't feel ANY pressure behind it. I pulled the slave ...

Asked by sshewell about 7 years ago - 1 Answer

Ranger clutch problem problem

1991 Ford Ranger xlt, 3.0l V6, 66,000 miles. It's a little difficult to shift into 3rd and sometimes 1st gear, especially after warming up ...

Asked by nyc74 about 7 years ago - 1 Answer

1991 Ford Escort problem

I changed the Master Cylinder AND the slave cylinder. Worked fine for awhile, but now it won't go into gear again. When I depress the ...

Asked by sshewell about 7 years ago - 1 Answer

2001 Honda Accord problem

Hello All The clutch in my Accord is very stiff to depress. It shifts into forward gears ok without grinding, but the reverse gear will ...

Asked by Leggo about 7 years ago - 3 Answers

What is wrong with my clutch? problem

Every time i start my car in the morning i press on the clutch and it stays down when i let go and it wont engage into first unless i pump ...

Asked by andy_boi about 7 years ago - 4 Answers

Cruise control / clutch problem

I have a 93 3000gt vr4. I was driving on the interstate with the cruise control on; When I was getting onto an exit (onto another highway), ...

Asked by lollerkate about 7 years ago - 0 Answers

Strange clutch problem problem

NV4500 trans/Cummins 4BT engine. Approx 4000 miles on all parts. Everything new and just replaced hyd master and slave yesterday. Same ...

Asked by 78BonanzaBlazer about 7 years ago - 0 Answers

8 inch of clutch play, have to rev really high to engage problem

Hi thanks, I have a saturn 4 door with the 1.9 litre engine. The engine was knocking horribly and the coolant was half oil...I'm not ...

Asked by rectifryer about 7 years ago - 2 Answers

Mazda rx7 clutch problems problem

I have a 1985 mazda rx7 with about 122000 miles. i had recently had a leak from the master cylynder and replaced the kit and the problem was...

Asked by rolando about 7 years ago - 0 Answers

1995 Chevrolet Truck problem

I have a 1995 chevy cavilier (manual trans. 5 speed) with a 2.3L DOHC engine with 150,000 miles on it. I just replaced the shift assembly...

Asked by ToddAbe about 7 years ago - 4 Answers

Clutch bleed problem

1989 ford f150 with 180 000 km. i bought the truck for 50 bucks with the original 5.0 l auto engine and tranny shot. I swapped the engine, ...

Asked by J Dub about 7 years ago - 1 Answer

Master cylinder replacement problem

I replaced my master cylinder and slave cylinder two days ago and the clutch has locked up on my already Is there another problem that is ...

Asked by ryanbarker8 about 7 years ago - 1 Answer

Toyota clutch problem problem

I have a 95 Toyota pickup4x4.It has the 4 cyl in it.I have 215,000 miles on this truck.I replaced the clutch 2 years ago.Everything went in ...

Asked by Larry Miller about 7 years ago - 3 Answers

Wierd clutch problem problem

1995 MITSUBISHI 3000GT BASE, Millage=158,000. Hi: I'm having a weird problem with my clutch. One day, I started the car with the clutch ...

Asked by aragorn_150 about 7 years ago - 2 Answers

2000 All Other Makes All Other Models problem

I own a 2000 F150 (4.2 Engine) 5-speed, 140k miles. Yesterday when I woke up, the car would not go into 1st very easily. I did notice ...

Asked by HB-Monika about 7 years ago - 1 Answer

Master cylinder or ? problem

Ok I Have a 1985 Toyota Corolla SR5 4ac engine. Ok about a week ago the clutch was working great. Then a couple days ago I noticed that the...

Asked by joeynhia about 7 years ago - 1 Answer

Hard to shift ford ranger problem

I have a 1994 ford ranger with 138,000 miles on it. The problem I have is when you come to a stop and take it out of gear and you take your ...

Asked by buff51p about 7 years ago - 1 Answer

1994 Ford Other problem

I had trouble with my clutch having to be bled every couple of weeks so I replaced the reservoir and master cylinder and bled it and ended ...

Asked by Chris.Taylor about 7 years ago - 0 Answers

1989 Isuzu Other problem

I have an 89 isuzu troper 4cyl. my clutch is giving me problems.it is very difficult to shift, i an't even get into first gear, but when the...

Asked by nefariousnick00 about 7 years ago - 1 Answer

Clutch master cylinder problem

After replacing the master cylinder and reservoir and bleeding the system I have a dead pedal and the transmission will not go into any gear...

Asked by Chris.Taylor about 7 years ago - 1 Answer

New clutch problem after dealer works on my brakes problem

I have a shift stick 2003 Mazda proteg 5 which I brought to a dealer to work on my brakes and exhuast system friday. Car has 92,000 miles in...

Asked by avi_wasserman about 7 years ago - 1 Answer

1998 Toyota Rav4 problem

My 98 RAV4 AWD with 5 speed manual transmission requires lots of force to shift from 1st to 2nd gear when the vehicle is cold (below ...

Asked by Oiler about 7 years ago - 6 Answers

Rare legend!! repairs? costs? problem

Hello, new to the forum. I currently have a 1992 Acura Legend LS Coupe with the six speed manual. I recently burned the clutch up on it and...

Asked by Dannysquints about 7 years ago - 4 Answers

Brakes wont bleed problem

93 Honda Civic, recently replaced clutch burned up. Then caliper front passenger side seized up. Replaced it then both front calipers locked...

Asked by Christi about 7 years ago - 1 Answer

Clutch slipping problem

I have a 1984 Toyota 2WD pickup with 165k miles. I replaced the clutch in January because it was slipping pretty bad. I put in a kit ...

Asked by plainman98 about 7 years ago - 5 Answers

1994 Ford Ranger problem

I own a 94 ford ranger 2wd 3.0 standard with 139k miles. Unfortunately, my brother in law drove the 1st 100k miles or so. Young and dumb ...

Asked by Baston8005 about 7 years ago - 1 Answer

1971 Jaguar Other problem

I've replaced both the clutch master and slave cylinders, but am unable to bleed the system. No fluid or air comes out of the slave cylinder...

Asked by Don Jones about 7 years ago - 2 Answers

Clutch or transmission problem

I have a 1999 Mitsubishi Eclispe, 142,000 mi., non-turbo, 4 cyl, with a manual transmission. Sometimes it feels as if the clutch is slipping...

Asked by watkinsc about 7 years ago - 0 Answers

1935 Ford Other problem

Clutch is feeling mushy , suspect by passing Master Cylinder. Pulled actuator off looks ok. Need to know how to bleed system to be sure ...

Asked by mtflynn about 7 years ago - 0 Answers

1999 Ford Other problem

I recently had the clutch replaced in my Ford Ranger and I have had nothing but problems.The mechanic replaced everything right down to the ...

Asked by m.a.wilson about 7 years ago - 0 Answers

2002 Ford Explorer problem

2002 Ford Explorer Sport: This may be an easy fix but I'm still stuck. I just replaced the clutch master cylinder on recommendation from ...

Asked by jvleer about 7 years ago - 2 Answers

Mr2 mk2 clutch problem

The problem is when you hold the clutch down it losses presure as if it needs bleeding there are no fluide leaks and clamping the master ...

Asked by chaz about 7 years ago - 2 Answers

Ford explorer shifting problem

I own a 2002 Ford Explorer Sport, 2WD, manual 5-Speed. Recently I had a breakdown because the truck would not go into gear at a stoplight. I...

Asked by jvleer about 7 years ago - 0 Answers

1995 Ford Mustang problem

I have about 120000 miles on my 1995 Mustang 3.8ltr car. Lately Ive been having more and more trouble shifting gears. The problem seems ...

Asked by sponge27 about 7 years ago - 1 Answer

1996 Honda Civic problem

Hello. My Honda Civic will not shift into gear with the car cranked, and with the car in gear (off) when I try to crank it, it moves forward...

Asked by btwoodward about 7 years ago - 2 Answers

Clutch problem

My 95 ranger clutch is going straight to the floori replaced my clutch not that long ago. the only problem i was having was when i idle with...

Asked by lcplcain about 7 years ago - 0 Answers

Cluth problems problem

1987 toyota 4x4pickup, manual transmission. rebuilt transmission year ago, repl clutch, slave cylinder and master cylinder. son took truck ...

Asked by SBowman57 about 7 years ago - 4 Answers

Slipping out of 5th (manual tranny 4runner) problem

I just bought a 1999 Toyota 4Runner 4x4 manual about a month ago. This is my first car/ manual transmission, so bear with me. I have ...

Asked by jwbehm about 7 years ago - 1 Answer

1984 Mazda RX7 problem

OK, I recently purchased a 1984 Mazda RX-7 GSL. The problem is, I cannot drive it. The night I bought it I was driving around and ...

Asked by alex_the_hipple about 7 years ago - 1 Answer

1915 Ford F-150 problem

Just put new motor in 1998 f-150 4.2 manual trans truck. 100k miles. kept the original clutch becuase it had plently of life left on it. ...

Asked by Palico about 7 years ago - 5 Answers

Car not turning on...after testing max speed problem

Hi. I drive a 2005 Ford Focus SE. I was on an open country road today and for the first time decided to test it max speed. After I reached ...

Asked by rae87 about 7 years ago - 2 Answers

Related Topics