Clutch Master Questions

Transmition problems problem

I have a 2000 ford ranger with 91741 miles on it. I have recently replaced the clutch master and slave cylinders, as well as the clutch, ...

Asked by dude69 about 6 years ago - 1 Answer

Clutch problem problem

I own a 1996 Firebird Formual 6 speed. When I just rest my foot on the clutch without applying any pressure, the pedal goes down. Even ...

Asked by DaemoN about 6 years ago - 0 Answers

Clutch leak problem

1994 Acura Integra LS, 122000 miles. My clutch is leaking, I basically know what the problem is. I think its the master cylinders. How can i...

Asked by twisted65 about 6 years ago - 0 Answers

2000 Ford Ranger problem

I have 2000 Ford ranger with 98k mileage on it. It recently swapped out the engine because the crank had actually cracked in the back half ...

Asked by drew007 about 6 years ago - 1 Answer

1993 Ford F-150 problem

Clutch went to floor and did not return when I first noticed problem. Pulled clutch pedal out with foot and it seemed to be fine except ...

Asked by Links2 about 6 years ago - 2 Answers

1998 GMC Sonoma problem

If anyone could help me I have a question. I have a 1998 gmc sonoma 4 cylinder 110000 miles. The problem is either my slave cylinder or ...

Asked by btnewcom about 6 years ago - 1 Answer

2012 Mazda Truck problem

I have a 2002 B3000 with 58000 miles. The slave cylinder started leaking and I took it to a very well trusted transmission shop because I ...

Asked by nstraws about 6 years ago - 1 Answer

Clutch staying down when pressed, no pressure... problem

I have a 1999 Honda Prelude (base) 5spd. I have around 119k. I recently found when I press the clutch pedal in, it feels as if there is NO ...

Asked by preludeguy about 6 years ago - 2 Answers

1987 Nissan 300ZX problem

I have an 87 nissan 300zx. I had lost all pressure in my clutch so i replaced the slave and master cylinders then after i bled the system. ...

Asked by carina smith about 6 years ago - 0 Answers

1995 Chevrolet Truck problem

1995 chevy 3500 5 speed w/ approx. 50000 miles.... its a company vehicle and a couple of the guys had to replace the clutch...its all back ...

Asked by kyleanderson about 6 years ago - 1 Answer

1999 Honda Prelude problem

My 99 prelude sh is having shifting problems. on the first gear it shifts ok but theres a wierd buzz noise when i clutch. then when i clutch...

Asked by cheech6922 about 6 years ago - 2 Answers

Mitsubishi mirage problem

Will a clutch master cylinder for a 1999 1.8 work on a 2001 1.8?

Asked by Brandon8912 about 6 years ago - 0 Answers

1993 All Other Makes All Other Models problem

2.0 liter 16 valve dohc I recently hade some clutch work done(master & slave cylinders and linkage), about 2 days later the rpm started...

Asked by foster107 about 6 years ago - 0 Answers

1994 Ford Ranger problem

I recently replaced my 5spd trans in my 94 ranger with a low mileage rebuilt trans from a 1989. Trans is the same as one that was in truck...

Asked by prototype1 about 6 years ago - 1 Answer

Clutch cunundrum problem

1987 Toyota Pickup, 4x4, Manual, 130k when truck is off and clutch pedal pressed the shifter will move to all gears. when truck is ...

Asked by dave.kooiker about 6 years ago - 0 Answers

5speed manual-clutch/release problem problem

'93 saturn sl2 DOHC(90,000miles) i just replaced the clutch/pressure plate, put the engine and tranny back together and they sit, back ...

Asked by turtle ki266 about 6 years ago - 0 Answers

2010 Toyota Other problem

I have a '95 t-100, v6 3.4 liter with 199650 miles. changed the clutch 5,000 miles ago. today while driving it the clutch pedal stayed on ...

Asked by windjammer about 6 years ago - 0 Answers

1985 Ford Escort problem

Good evening, I have a 1985 Ford escort with approximately 115,000 miles. Problem is with the clutch. Drove the car yesterday with no ...

Asked by boat about 6 years ago - 1 Answer

Neutral safety switch problem

I bought a new neutral safety switch for my 2001 S10 because when I went to crank it having the clutch engaged it would not start.My ...

Asked by s10dummy about 6 years ago - 1 Answer

1996 Honda Accord problem

Just had Master and slave cylinders replaced do to leaks (120K miles). Now have problems. On long-trips, +40min on highway, I feel like ...

Asked by Meldrim25 about 6 years ago - 1 Answer

Clutch master cylinder problem

90 Isuzu Pickup 190,000 still drives great. I was beginning to drive the vehcle, I stepped on the clutch pushed it to the floor and it didn...

Asked by jerseycane about 6 years ago - 1 Answer

2001 GMC Other problem

I have a 2001 GMC Sonoma with about 73,000 miles on it. Last summer, my clutch began to act funny; I would depress the clutch almost to the...

Asked by bethanatah about 6 years ago - 0 Answers

1991 Nissan Other problem

Have a 91 Nissan King Cab 5 speed. While running down the road loose clutch pressure, if while running you put it into Neutral and pump the...

Asked by pratthe about 6 years ago - 0 Answers

2001 Chevrolet Other problem

For my 2001 Chevy S10 4 Cyl. 2wd 5 sp. with 65,000 miles. All of a sudden, The clutch has no back pressure. I have to push it all the way to...

Asked by toneboy about 6 years ago - 0 Answers

1996 Mercury Other problem

My clutch was gone and when I took it in the mechanic told me my master brake cylinder was empty and that the clutch slave(?) was leaking. ...

Asked by bluizeaz about 6 years ago - 0 Answers

1930 Mazda Protege problem

I have a 1990 Mazda Protege with 175000 miles. Ever since I changed the clutch master cylinder it keeps blowing the fuse. I can't remember ...

Asked by darascal101 about 6 years ago - 1 Answer

Clutch problems problem

Hi i have a Hyundai Lantra 1995 model 125500 km and recently i noticed the clutch pedal got a little stiffer and also noticed that the ...

Asked by skat about 6 years ago - 2 Answers

1997 Isuzu Other problem

Hello, I recently had my clutch go out so I purchased the new clutch and installed it myself. However, at this point, when I push down ...

Asked by chazlink about 6 years ago - 1 Answer

Manual trans hydraulic clutch system problem

Hello, I have a 2002 chevy pick-up S-10 4cyl 5speed NV1500 trans 75000 miles.When driving the truck in hot temperatures,mostly stop and go,...

Asked by Timothy Pall about 6 years ago - 1 Answer

I need help now problem

I own a 1995 ford ranger with 120318 miles on it when i am driving out of nowhere i have tried to shift up or down and it wont go. but then ...

Asked by robotopher about 6 years ago - 0 Answers

Wierd shifting problem

I own a 1995 ford ranger with 120318 miles on it when i am driving out of nowhere i have tried to shift up or down and it wont go. but then ...

Asked by robotopher about 6 years ago - 0 Answers

Help!!!!!!!!!!!!!!!!!!!!!!!!!! problem

I own a 1995 ford ranger with 120318 miles on it when i am driving out of nowhere i have tried to shift up or down and it wont go. but then ...

Asked by robotopher about 6 years ago - 6 Answers

Clutch pedal will not retract. problem

I have a 1990 toyota pickup V6 3.0 liter. my clutch pedal will not retract after i depress while the vehicle engine is on .i've ...

Asked by toyotakenya about 6 years ago - 0 Answers

1994 Honda Accord problem

My car, a 94 Honda Accord 5 speed w/ 110,000 miles recently has had some shifting issues. It will be a struggle going into first and reverse...

Asked by autodesigns about 6 years ago - 3 Answers

Clutch master slave replaced: how to bleed. problem

I just replaced the slave cylinder on my 91 Mazda B2200 and can't get it bled right. Can some one guide me? (I recently also read the Master...

Asked by gramo about 6 years ago - 0 Answers

Brake fluid reseviors problem

I have a 1990 Honda Accord with 209,000 miles on it, I just had all the brakes redone on it, but the front calipers seem to keep applying ...

Asked by chiconics about 6 years ago - 3 Answers

2012 Mazda Truck problem

Hello Bob, Ken and 2Carpros staff. I am having a problem with my wife’s 1992 Mazda B2200 (4 cyl. manual with ~155,000 mi.). I cannot ...

Asked by Salal about 6 years ago - 1 Answer

1998 Isuzu Other problem

98 Isuzu Rodeo 4Cyl Manual, 165k miles. Touch the clutch pedal, it drops to the floor. Clutch fluid is full. I pulled out the master ...

Asked by jbsnead about 6 years ago - 1 Answer

Problems with clutch pedal pressure problem

Im not too good with hydraulic system...good on everything else execpt hydraulic...so here it goes.....I installed a new master cylinder ...

Asked by 98 GST about 6 years ago - 1 Answer

Leaky clutch repair problem

I have a 95 Isuzu Rodeo, 6 cyl, 2wd with a leaky clutch system. I have been refilling the fluid about once a week. This is the third ...

Asked by jessdan40 about 6 years ago - 1 Answer

1998 Chevrolet Truck problem

I was driving my car down the road when I came to a complete stop then tried to go my car made this awful clunk clunk sound. I then put it ...

Asked by silkyhot61 about 6 years ago - 1 Answer

2010 Chevrolet Other problem

Chevrolet s10 95' 118k mi. I am replacing the clutch start switch and also the pivot bushing on the pedal. I have removed the clutch master...

Asked by fishcaptain about 6 years ago - 0 Answers

1993 Honda Civic problem

I need to know how to install the clutch master cylinder all the parts inside the boot fell apart so i need to know how to put the clutch ...

Asked by Vtec4life about 6 years ago - 0 Answers

1998 Chevrolet Truck problem

I have a 1998 Chevy Camaro, 85,000 miles, and two days ago the clutch started feeling very easy to push in. Not as much back pressure as ...

Asked by kellyanna4 about 6 years ago - 3 Answers

1999 Honda Other problem

Hi all, Thanks in advance for any info you can give me on this. I have a 1999 Honda Accord EX 4 cyl. 4 door sedan with 112,000 miles ...

Asked by BloggingITGuy about 6 years ago - 0 Answers

1990 All Other Makes All Other Models problem

I have a 1990 k2500 cant get any clutch pedal new master cylinder and slave clutch and know it isnt getting any fuel either

Asked by william64 about 6 years ago - 1 Answer

1996 Ford Other problem

Hi I just had my clutch replaced along with the slave cylinder and the line that runs from the master cylinder to the trans. when I picked ...

Asked by shawn565 about 6 years ago - 0 Answers

1989 Isuzu Other problem

What is the name of the hose between the master clutch assembly and the slave cylinder, and where can i get one?

Asked by sue sarfine about 6 years ago - 1 Answer

Related Topics