Clutch Master Questions
- 1983 Ford F-250 Engine Problem with 150000 miles
- I have a Ford F250 351 ho 4 speed that wont go into gear it has a brand new clutch what could it be i drove it yesterday just fine and i ...
- Asked by FordF250351Ho about 7 days ago - 1 Answer
- 1998 Isuzu Rodeo Repair Problem with 123000 miles
- My clutch pedal sticks to the floor. I have replaced the slave cylinder and clutch master cylinder checked the lines and bled the system. ...
- Asked by sgarver88 about 7 days ago - 1 Answer
- 2005 Honda City Repair Problem with 555667 miles
- Sir i am repairing my clutch..my car clutch doesnot have pressure so i change its whole washer kit situated inside the cylinder again i am ...
- Asked by RAUFMUSHTAQ about 9 days ago - 1 Answer
- 1999 Dodge Ram Drivetrain Problem with 158000 miles
- The clutch will not engauge, it feel like there is no pressure behind to push the rod to engauge the clutch. Does the 1999 ram have the ...
- Asked by patio123 about 11 days ago - 2 Answers
- 1998 Dodge Ram Drivetrain Problem with 225000 miles
- My clutch went out on my 98 Dodge Ram 2500 4WD the other day. I limped it home shifting like a big truck timing the shifts w/out the clutch...
- Asked by runningneo about 18 days ago - 1 Answer
- 2000 Honda Accord Drivetrain Problem with 288000 miles
- I have a 2000 Honda Accord with 2.2 vtec engine (f23a1). A couple days ago, my clutch started getting stuck to the floor. I can still shift ...
- Asked by samdby about 20 days ago - 1 Answer
- 2005 Renault Masters Drivetrain Problem with 85000 miles
- Hi have had a new clutch fitted because we thought the release bearing was rattling!! but complete new cluth kit an its still the same. the...
- Asked by cmw75 about 22 days ago - 1 Answer
- 1961 GMC Other Brakes Problem with 100000 miles
- I'm having brake problems with my 1960 GMC 3500 2 ton truck. I just got it from a neighbor and he had just put a new master cylinder on it. ...
- Asked by Nomansland about 22 days ago - 4 Answers
- 2006 Ford Mustang Repair Problem with 15000 miles
- My dad was going to do a brake stand the other day, and he dumped the clutch and went for the brakes, but it sounded as if the clutch was ...
- Asked by mustangguy1 about 23 days ago - 4 Answers
- 1999 Ford Ka Repair Problem with 48000 miles
- Hello, Ive recently bought a ford ka and Sometimes my clutch goes down far too easily when I go to change gear as if its slacking and ...
- Asked by Kayleighnjessy about 25 days ago - 1 Answer
- 2012 Honda Civic Drivetrain Problem with 10000 miles
- I am leasing a 2012 Honda Civic Si. I taught my fiancee to drive stick on it when we first purchased it. Obviously there was some stalling ...
- Asked by mrtecno about 28 days ago - 1 Answer
- 2000 Dodge Neon Drivetrain Problem with 120000 miles
- My car has a 5-speed manual transmission. The clutch was just replaced and then, all of the sudden, it went out and won't engage. The pedal ...
- Asked by Rbelcher11 about 1 month ago - 3 Answers
- 1987 Chevrolet S-10 Repair Problem with 322890 miles
- Ive put in a new fork and slave cylinder and throw out bearing in my my 87 s10 and still have no pressure at all on pedal ive even tried ...
- Asked by john pace 56 about 1 month ago - 1 Answer
- 1987 Chevrolet S-10 Drivetrain Problem with 322890 miles
- Replaced throw out bearing fork and slave cyinder bleeded the line but no pedal at all
- Asked by john pace 56 about 1 month ago - 1 Answer
- 1991 GMC C2500 Repair Problem with 200000 miles
- We are having a problem shifting our 1ton. We have replaced the clutch, clutch plate, cylinder and everything related to the clutch and it ...
- Asked by chettaswoman about 1 month ago - 3 Answers
- 1992 Isuzu Truck Engine Problem
- While my brother was driving his clutch pedal went to floor wouldnt come back up was wondering what the problem might be,thank you
- Asked by psjones1 about 1 month ago - 1 Answer
- 1988 Mazda b2600 Drivetrain Problem with 99000 miles
- My 1988 Mazda B2600, 4WD has a manual transmission. When I engage the clutch pedal, I get a grinding of the gears when starting the truck ...
- Asked by jah180 about 1 month ago - 1 Answer
- 1987 Chevrolet S-10 Repair Problem with 322890 miles
- I have fluid to slave cylinder and it moves but dont engage the clutch to put it in gear
- Asked by john pace 56 about 1 month ago - 1 Answer
- 1987 Chevrolet S-10 Repair Problem with 322890 miles
- My 87 s10 is a 4 speed manual transmission and the problem i am having is the clutch pedal will not push down at all master cylinder tank is...
- Asked by john pace 56 about 1 month ago - 1 Answer
- 1999 Mazda Miata Brakes Problem with 174000 miles
- My brake master cylinder is leaking. I can crank up the car, but the clutch pedal is so loose and goes all the way down to the floor. I can'...
- Asked by sharonm about 1 month ago - 1 Answer
- 2007 Ford Mustang Drivetrain Problem with 60000 miles
- My car shifts great ,the clutch and presure plate have been replaced at 50000 , but in traffic it becomes hard to get in gear. I have driven...
- Asked by robbiezx7 about 1 month ago - 3 Answers
- 1997 Mazda Other Drivetrain Problem with 15000 miles
- I cannot get into an gear once I have driven the vehicle for over 20 minutes. In the morning everything is fine but as soon as the engine ...
- Asked by (pending member) about 1 month ago - 1 Answer
- 1997 Ford Ranger with 160 miles
- The clutch will not push down at all to much preasher or stuck
- Asked by (pending member) about 1 month ago - 1 Answer
- 2002 Fiat Stilo Engine Problem with 104000 miles
- How do you bleed a clutch master cylinder?
- Asked by (pending member) about 1 month ago - 1 Answer
- 1993 GMC Sierra Repair Problem
- I have replaced the master cylinder and slave cylinder on the clutch and still no pedal pressure...any ideas?
- Asked by (pending member) about 1 month ago - 1 Answer
- 2008 Suzuki Jimny Noise Problem with 165000 miles
- When the clutch is depress a squeek is heard and i was wandering if the master cylinder rubbers need changing
- Asked by (pending member) about 1 month ago - 1 Answer
- 1998 Honda Civic Drivetrain Problem with 135000 miles
- The clutch suddenly stopped working after being able to pump it up to work...what could it be?
- Asked by kendrajonesstarling about 1 month ago - 1 Answer
- 2008 Fiat Ducato with 27000 miles
- Why does clutch pedal. Not return after long. journey have replaced. Master slave, not wanting. To change slave if not the problem due to ...
- Asked by (pending member) about 1 month ago - 1 Answer
- 1993 Ford Escort Drivetrain Problem with 180795 miles
- Where do i put the fluids formanualcluth for transmission
- Asked by (pending member) about 1 month ago - 1 Answer
- 1992 Ford F-150 Engine Problem with 194000 miles
- The engine is a 4.9 ltr 300 cu in inline 6. One of fords best engines. It sat for a little while so I decided to get the old thing up and ...
- Asked by (pending member) about 1 month ago - 1 Answer
- 1994 BMW 318i Drivetrain Problem with 131000 miles
- When I drive the car for a long distance the clutch quits working can u help please
- Asked by (pending member) about 1 month ago - 1 Answer
- 1995 Ford F-150 Drivetrain Problem with 215000 miles
- HOW DO I START TO REPLACE THE CLUTCH SLAVE CYLINDER ON MY4.9 LITTER 5SPEED1995 ford f150? feels like the pedals not connected to anything.
- Asked by (pending member) about 1 month ago - 1 Answer
- 2006 Mazda b2300 Drivetrain Problem with 109000 miles
- Problems shifting the manual transmission have been getting progressively worse. Replaced the clutch and pressure plate 15months ago. ...
- Asked by (pending member) about 1 month ago - 1 Answer
- 2010 Kia Picanto Engine Problem with 110189 miles
- My car doesent go into gear
- Asked by (pending member) about 2 months ago - 1 Answer
- 1993 Ford Probe Drivetrain Problem with 202000 miles
- I have very little pressure on my clutch pedal, there are no leaks anywhere.if I try to bleed it, it pulls the pedal to the floor.if I put ...
- Asked by (pending member) about 2 months ago - 1 Answer
- 1989 Isuzu Other
- We have new seals for the clutch master cylinder and a rebuild kit for the slave cylinder. But we don't have any schematics to make sure ...
- Asked by nandaeschlerhauser about 2 months ago - 2 Answers
- 1985 Jeep Cherokee Drivetrain Problem with 80000 miles
- Comprehensive clutch adjustment procedure Some one else has installed a new clutch master & slave cylinder. now the peddle only ...
- Asked by (pending member) about 2 months ago - 1 Answer
- 2008 Honda CRV with 21000 miles
- THE CLUTCH PEDAL IS HARD TO PRESS,THE WORKING OF THE CLUTH IS ALRIGHT,NO SLIPPING ETC.PLEASE HELP.MOST OF THE MECHANICS SAY CHANGE THE ...
- Asked by (pending member) about 2 months ago - 1 Answer
- 2005 Hyundai Elantra Repair Problem with 120000 miles
- I got a new transimission and clutch approximately 3 weeks ago, and yesterday my pedal was stuck to the floor and wouldn't shift to any ...
- Asked by casetleberry about 2 months ago - 6 Answers
- 2002 Kia Spectra Repair Problem with 13340 miles
- I had a brand new clutch put in now my clutch peddle stays. Dowñ to the floor and where the brake fluid go s gets empty after pressing the ...
- Asked by (pending member) about 2 months ago - 1 Answer
- 1983 Mazda RX7 Drivetrain Problem with 80000 miles
- Hi I gave a 83 rx7 gs and I just got it running it was sitting. for 5 years and I drove it for a day and I parked it cuz the clutch would ...
- Asked by (pending member) about 2 months ago - 7 Answers
- 2004 Volkswagen Polo Engine Problem with 187658 miles
- Hi my name is Calbi ,I have a Polo manuel that recently pops up his service ligths and I'm 80km over the service time now it just swith off ...
- Asked by kaydo about 2 months ago - 8 Answers
- 2010 Volkswagen Passat with 90000 miles
- 3 clutch master cylinders been fitted lasts 3days then clutch pedal hits floor u lift it up pump it and its fine for few hours same again it...
- Asked by (pending member) about 2 months ago - 0 Answers
- 2005 Kia Spectra Drivetrain Problem with 150000 miles
- Second and third gear grind when I shift
- Asked by belucky about 2 months ago - 1 Answer
- 1998 Chevrolet S-10 with 231000 miles
- The clutch did not release good when it warmed i replaced the clutch assy with a NAPA premium assy i also replaced the slave cyl .the ...
- Asked by (pending member) about 2 months ago - 1 Answer
- 1991 Honda Accord Repair Problem
- I have a 91 Honda Accord Lx. My clutch pedal works fine when I push it hard and fast but falls to the floor when I push it slow. What would ...
- Asked by christinahemingway about 2 months ago - 9 Answers
- 1997 Chevrolet Cavalier Drivetrain Problem with 270000 miles
- My clutch pedal is going right to the floor and staying there, i tried bleeding it but it will only work for a day or 2, i heard it could ...
- Asked by jamesbrayon about 2 months ago - 1 Answer
- 2009 Chrysler Sebring Repair Problem with 47000 miles
- Having problems with clutch on my Sebring 2009 2.0 CRD - clutch feels very soft and unless keep pumping it up it's impossible to change gear...
- Asked by (pending member) about 2 months ago - 0 Answers
- 1994 Ford F-150 Drivetrain Problem with 180000 miles
- When im sitting at a stop light and i have to clutch in and in gear sometimes it will like bleed off so to speak and it will grab and the ...
- Asked by (pending member) about 3 months ago - 1 Answer
- 2002 Honda Civic Drivetrain Problem with 168000 miles
- My 02 civic lx all of a sudden became very difficult to shift, 1st & R being the worst. No warning signs, pedal feels the same. Also, ...
- Asked by (pending member) about 3 months ago - 0 Answers
Related Topics
Got a Car Question?
Automotive repair can be puzzling without the right information. Fortunately, 2Carpros was created to help people with everyday repair problems in mind. New systems are being introduced yearly, instruction is needed to complete a service or repair. We offer access to a panel of ASE and manufacturer specific certified mechanics that are dedicated to guide novices and experts alike in any repair. After a detailed question enters our system it's filtered to a specializing mechanic. Once the problem has been indentified our technician will respond with diagrams, instruction and any additional information required. 2Carpros is a completely FREE service. Our technicians are compensated through donations and advertising revenue.
Ask a QuestionNot Sure Where to Start?
Most car repair is basic and straight forward. Unfortunately auto related problems such as "electrical" and "engine performance" issues can be complicated. These styles of problems can create confusion which leads to unnecessary repairs. These mistakes not only consume resources they waste time as well. Having the correct instruction can pinpoint the malfunction while generating the proper repair procedure. Our first things to check section includes step by step "do it yourself" troubleshooting guides that offer video with illustrations showing hands on interaction while providing tips of the trade for a successful car repair.
First Things to Check