Bleed Clutch Questions

2007 Vauxhall Vectra Engine Problem with 84000 miles

I have recently had a new clutch 3 weeks ago but when doing a long journey and being in the same gear for 20-30 miles. I stopped off then ...

Asked by mand25red about 7 days ago - 3 Answers

1999 Dodge Ram Drivetrain Problem with 158000 miles

The clutch will not engauge, it feel like there is no pressure behind to push the rod to engauge the clutch. Does the 1999 ram have the ...

Asked by patio123 about 8 days ago - 2 Answers

1998 Dodge Ram Drivetrain Problem with 225000 miles

My clutch went out on my 98 Dodge Ram 2500 4WD the other day. I limped it home shifting like a big truck timing the shifts w/out the clutch...

Asked by runningneo about 15 days ago - 1 Answer

1961 GMC Other Brakes Problem with 100000 miles

I'm having brake problems with my 1960 GMC 3500 2 ton truck. I just got it from a neighbor and he had just put a new master cylinder on it. ...

Asked by Nomansland about 19 days ago - 4 Answers

2006 Ford Mustang Repair Problem with 15000 miles

My dad was going to do a brake stand the other day, and he dumped the clutch and went for the brakes, but it sounded as if the clutch was ...

Asked by mustangguy1 about 20 days ago - 4 Answers

2005 Ford Ranger Drivetrain Problem with 80000 miles

HYDRAUKLIC CLUTCH LINE POPPED OUT OF THE TRANSMISSION SO I HAD TO REPLACE THE SLAVE CYLINDER AND CLUTCH FLUID LINE .....NOW THE CLUTCH IS ...

Asked by brianMATTILA about 26 days ago - 1 Answer

2000 Dodge Neon Drivetrain Problem with 120000 miles

My car has a 5-speed manual transmission. The clutch was just replaced and then, all of the sudden, it went out and won't engage. The pedal ...

Asked by Rbelcher11 about 26 days ago - 3 Answers

1987 Chevrolet S-10 Repair Problem with 322890 miles

Ive put in a new fork and slave cylinder and throw out bearing in my my 87 s10 and still have no pressure at all on pedal ive even tried ...

Asked by john pace 56 about 27 days ago - 1 Answer

1987 Chevrolet S-10 Drivetrain Problem with 322890 miles

Replaced throw out bearing fork and slave cyinder bleeded the line but no pedal at all

Asked by john pace 56 about 27 days ago - 1 Answer

1987 Chevrolet S-10 Repair Problem with 322890 miles

I have fluid to slave cylinder and it moves but dont engage the clutch to put it in gear

Asked by john pace 56 about 1 month ago - 1 Answer

1995 Ford Ranger Drivetrain Problem with 100000 miles

New clutch system,ran fine for a few miles.won't shift into gear while engine is running, tried to bleed.what is the proper bleeding ...

Asked by Bmillert about 1 month ago - 1 Answer

2002 Fiat Stilo Engine Problem with 104000 miles

How do you bleed a clutch master cylinder?

Asked by (pending member) about 1 month ago - 1 Answer

1993 GMC Sierra Repair Problem

I have replaced the master cylinder and slave cylinder on the clutch and still no pedal pressure...any ideas?

Asked by (pending member) about 1 month ago - 1 Answer

2008 Fiat Ducato with 27000 miles

Why does clutch pedal. Not return after long. journey have replaced. Master slave, not wanting. To change slave if not the problem due to ...

Asked by (pending member) about 1 month ago - 1 Answer

1994 Infiniti J30 Heater Problem with 199231 miles

Rpl replace the Thomas the clutch fan of bleed the coolant flush out to eat a call still have cold air coming out

Asked by (pending member) about 2 months ago - 1 Answer

2010 Kia Picanto Engine Problem with 110189 miles

My car doesent go into gear

Asked by (pending member) about 2 months ago - 1 Answer

1993 Ford Probe Drivetrain Problem with 202000 miles

I have very little pressure on my clutch pedal, there are no leaks anywhere.if I try to bleed it, it pulls the pedal to the floor.if I put ...

Asked by (pending member) about 2 months ago - 1 Answer

1989 Isuzu Other

We have new seals for the clutch master cylinder and a rebuild kit for the slave cylinder. But we don't have any schematics to make sure ...

Asked by nandaeschlerhauser about 2 months ago - 2 Answers

2006 Chevrolet Cobalt with 140000 miles

How to remove manual transmission to change the clutch

Asked by jamesjohnson1 about 2 months ago - 1 Answer

2000 Daewoo Matiz Engine Problem with 48000 miles

Carnt get the car to go into first gear when engine is running

Asked by tonyc69 about 2 months ago - 1 Answer

1994 Honda Passport Drivetrain Problem with 246000 miles

After installin new clutch pressure plate and release bearing per instructions in Haynes Manual, I put everything back together only to ...

Asked by jamiekuykendoll about 2 months ago - 1 Answer

1991 Honda Accord Repair Problem

I have a 91 Honda Accord Lx. My clutch pedal works fine when I push it hard and fast but falls to the floor when I push it slow. What would ...

Asked by christinahemingway about 2 months ago - 9 Answers

1988 Honda Prelude Drivetrain Problem with 242000 miles

Been driving my car and up till today it was working and shifting just fine. So today when i was driving my car wouldn't shift as easy as ...

Asked by king8657 about 2 months ago - 1 Answer

1997 Chevrolet Cavalier Drivetrain Problem with 270000 miles

My clutch pedal is going right to the floor and staying there, i tried bleeding it but it will only work for a day or 2, i heard it could ...

Asked by jamesbrayon about 2 months ago - 1 Answer

1994 Ford F-150 Drivetrain Problem with 180000 miles

When im sitting at a stop light and i have to clutch in and in gear sometimes it will like bleed off so to speak and it will grab and the ...

Asked by (pending member) about 2 months ago - 1 Answer

2003 Kia Spectra Drivetrain Problem with 114000 miles

I just bought this 2003 kia spectra 5 speed and am having problems with my clutch it goes all yhe way to the flloor and then springs back up...

Asked by (pending member) about 3 months ago - 1 Answer

1999 Dodge Dakota Drivetrain Problem with 135000 miles

How do u bleed clutch slave cylinder that has no bleeder

Asked by (pending member) about 3 months ago - 1 Answer

1999 Dodge Dakota Drivetrain Problem with 135000 miles

How do u bleed clutch slave cylinder that has no bleeder

Asked by (pending member) about 3 months ago - 1 Answer

2001 Ford Ikon Repair Problem with 108000 miles

No pressure in a clutch after finding out that the pipe supplying pressure was damaged and the pipe was emty,I tried to fix the pipe and ...

Asked by (pending member) about 3 months ago - 1 Answer

1991 GMC C1500 Drivetrain Problem with 150000 miles

Have a 1991 GMC pickup truck and just replaced the clutch master cylinder and slave cylinder but still have no pressure when pressing down ...

Asked by (pending member) about 3 months ago - 1 Answer

1995 Mercury Mystique Repair Problem with 145000 miles

Why does the clutch lose pressure after take off but will gain pressure and allow changing of gear but lose all pressure again?

Asked by Spydermonkey about 3 months ago - 1 Answer

2002 Mazda 323 Drivetrain Problem with 124000 miles

Can the cluth be adjusted - or how do you bleed the clutch. (hydraulic type)

Asked by (pending member) about 3 months ago - 0 Answers

2001 Pontiac Trans Am with 120 miles

My clutch pedal goes to the floor and returns back but doesnt have tension or pressure. I dont have clutch now but I still have plenty of ...

Asked by (pending member) about 3 months ago - 1 Answer

1999 Pontiac Trans Am Drivetrain Problem with 15100 miles

Out of the blue, car will not go into any gear when car is running. Turned off, it seems to go into any gear. Is it clutch, solenoid, gear ...

Asked by stevefed about 4 months ago - 3 Answers

1990 GMC C3500 with 200000 miles

Neef help. clutch went out have replacedmaster cylinder. slave cylinder clutch platr flywheel and throw out beAring blwd syztem have good ...

Asked by (pending member) about 4 months ago - 1 Answer

1997 Mazda 323 Engine Problem with 250000 miles

I just changed the clutch plate and got everything running and bleed the clutch and refilled oil, didn't drive it for a couple days now now ...

Asked by D-reck about 4 months ago - 5 Answers

1986 Chevrolet S-10 Repair Problem with 197000 miles

I have installed a clutch master cylinder on my 86 Chevrolet S-10 4x4 pick-up truck, it has 2.5 engine, having trouble bleeding it and ...

Asked by (pending member) about 4 months ago - 1 Answer

1993 Honda Prelude Engine Problem with 200 miles

I had to bleed my clutch master cylinder. There was an electrical conector above it that i undid to reach the master cylinder. I forgot to ...

Asked by (pending member) about 4 months ago - 1 Answer

1996 Toyota Celica Repair Problem with 125000 miles

Hi, our celica has been stationary in the driveway for 2 years. Time has come to get it running and all appears goo after a minor service, ...

Asked by (pending member) about 4 months ago - 1 Answer

1991 Jeep YJ with 14400 miles

I had a slave cylinder installed and it's hard to change gears now but I have good clutch pressure

Asked by (pending member) about 4 months ago - 1 Answer

1991 Nissan 300ZX Drivetrain Problem with 112000 miles

I drove to work one morning and everything was fine. I get out of work open my car door and as soon as i pressed the clutch peddle it went ...

Asked by (pending member) about 4 months ago - 1 Answer

2001 Saturn SL2 Drivetrain Problem with 130000 miles

I have just replace the clucth, preasure plate and throw out bearing and the master and slave cylinder all and the master slave cylinder was...

Asked by sreeser about 4 months ago - 7 Answers

2000 Subaru Outback Repair Problem with 14000 miles

Limited wagon..I spun car in sand deep .. Started smoke ... Clutch pedal fell.. Recent clutch pedal won't bind ... Sticking floor... Stick ...

Asked by (pending member) about 4 months ago - 1 Answer

2002 Dodge Ram Heater Problem with 87000 miles

I got a 2002 dodge ram 1500. The heater blows warm air but not hot hot. When i put the heater in full blast it only gets warm {to like room ...

Asked by michael1128 about 4 months ago - 7 Answers

1989 Ford F-250 Drivetrain Problem with 156000 miles

I have a 1989 F250 5 speed that the clutch master cylinder went out and im trying to replace it. What is the best way to go about this. I ...

Asked by (pending member) about 4 months ago - 1 Answer

1994 Mitsubishi Pajero Drivetrain Problem with 150000 miles

HI, i have a 1994 pajero which at times will not let me engage gears. If i turn off engine, select 1st gear,press clutch and start engine it...

Asked by (pending member) about 4 months ago - 1 Answer

1990 Chevrolet Truck Repair Problem with 11800 miles

I replace my cutch slave but i can not build up pressure on my clutch

Asked by (pending member) about 4 months ago - 1 Answer

1998 Mazda b2500 Drivetrain Problem

What might be the problem when the clutch won't allow the transmission to engage. The clutc pedal has no resistance and goes to the floor.

Asked by (pending member) about 4 months ago - 1 Answer

1991 Jeep Wrangler Drivetrain Problem with 150428 miles

Hello, my clutch feels as if its under no pressure when depressing (real easy to push to floor). it will return to upward position ...

Asked by (pending member) about 5 months ago - 1 Answer

2007 Nissan Tiida with 80000 miles

Hi Guys. Ihave replaced the clutch on my nissan tiida,my question is how do you bleed the clutch?

Asked by ballas about 5 months ago - 2 Answers