Brake Caliper Questions

2000 All Other Makes All Other Models problem

Truck started pulling to passenger side about 2 months ago,since then have replaced wheel bearing,brake lines and pads,seems to have good ...

Asked by matt2000z71 about 6 years ago - 0 Answers

2000 All Other Makes All Other Models problem

Truck started pulling to passenger side about 2 months ago,since then have replaced wheel bearing,brake lines and pads,seems to have good ...

Asked by matt2000z71 about 6 years ago - 0 Answers

Anti-lock light? problem

Greetings. I have same problem. Same symtoms I gues. I find that my "Anti-lock" light doesn't come on till I start moving. This I ...

Asked by GothamElex about 6 years ago - 6 Answers

1987 Ford F-150 problem

My 1987 Ford Pickup Truck 150 has 200,000 miles on it. My problem is when I apply the brakes the brake pedal feels like mush--and the pedal...

Asked by johnp about 6 years ago - 1 Answer

Brake sysetem problem

What are the steps to replaceing the entire brake system on my Dodge 2003 Grand Carvan SE?

Asked by jhobbs about 6 years ago - 1 Answer

1993 All Other Makes All Other Models problem

I have a 1993 Grand Prix. 118000 Miles on it. I bought this car used. Really need some help to figure out my problem. When driving the ...

Asked by robcet1 about 6 years ago - 9 Answers

1996 Honda Accord problem

I'm trying to replace the passenger side CV Axle on my 96 Accord. I have the Haynes manual to assist me, but it is diffiicult to understand...

Asked by mrruck about 6 years ago - 1 Answer

Brake syestem problem

I have a 2003 Dodge Grand Caravan which has 53,000 miles and has a 6 cyclinder engine. I did something dumb and now I am trying to fix my ...

Asked by jhobbs about 6 years ago - 1 Answer

My vauxhall cavalier cdx problem

Whilst driveing my car when im changeing gear up car starts to rev up it dosentdo this when its starts upfirst thing after a few miles its ...

Asked by martin about 6 years ago - 3 Answers

Lincoln rear disc brakes problem

How to compress rear calipers

Asked by FOXKIDS about 6 years ago - 1 Answer

1996 All Other Makes All Other Models problem

What size torx head are the bolts holding the brake caliper bracket on?

Asked by oakley54 about 6 years ago - 0 Answers

Noise from rear end problem

2000 S-10 Blazer, 2WD, 4Dr, 6 Cyl. Noise just started. It sound like a french horn (low pitch) when I apply brakes during backing up and ...

Asked by DaleHill about 6 years ago - 0 Answers

Brakes problem

Ok it was the caliper on the driver side, the fluid was not going through it was completely dry. We changed that but have absolutely no ...

Asked by prettiesblueeyes about 6 years ago - 3 Answers

1994 Buick Skylark problem

Apprx 150 k miles. Sympton, drive pavement, when turning it seems to lurch, like a 4x4 with a locking 1to1 front axle locked in. Sympton...

Asked by ryan jerisk about 6 years ago - 0 Answers

Truck pulls left problem

My 1994 4.3 L chevy pckup pulls left at any speed when braking only. No noise or vibration of any movement is noticeable. Upper, lower, ...

Asked by macbusy about 6 years ago - 5 Answers

Brake trouble problem

Hi, I was wondering if you had any information on why my 1993 Ford f250 3/4 ton's front brakes are not fully releasing? It will come to a ...

Asked by jdb453 about 6 years ago - 1 Answer

1963 Chevrolet Truck problem

I have a 63 Chevy Biscayne with a manual transmission and standard drum brakes. It has recently lost almost all power and feels like ...

Asked by gravitron about 6 years ago - 0 Answers

Removing front hub problem

I just bought a 2000 Honda Civic EX 2dr, 5spd M with 95k miles and my front brakes began to squeal. When I attempted to remove the front ...

Asked by medic2 about 6 years ago - 1 Answer

2003 Ford Focus problem

I own a 2003 Ford SVT Focus with 42000 miles. I just replaced the front pads and turned the rotors. I went to do the back but when i tried...

Asked by DGB302 about 6 years ago - 4 Answers

Car makes metallic scraping noise problem

93 Mercury Cougar 143000 miles. Car makes a metallic scraping noise while in motion. I just had the brake system checked about 2 weeks ago...

Asked by jman46241 about 6 years ago - 2 Answers

2000 All Other Makes All Other Models problem

I HAVE A 2OOO POLICE INTERCEPTOR CROWN VICTORIA, and was wanting to know what models interchange the following brake parts? 12.4" Rotor...

Asked by JDIAMOND711 about 6 years ago - 0 Answers

2000 Jaguar XJS problem

I’m preparing to change the rear brake pads. I’ve had problem in the past compressing the caliper on other models. Some have to be ...

Asked by gmelenyzer about 6 years ago - 3 Answers

Brakes problem

Hi I am having a strange brake problem with my 1994 Ford F250 Turbo Diesel IDI. It has 284000.0 KM, and the E4OD Auto Transmission. ...

Asked by silverwolf about 6 years ago - 3 Answers

1995 Pontiac Grand Prix problem

How do i replace the front and rear rotors on a 1995 pontiac grand prix

Asked by bill4279 about 6 years ago - 1 Answer

Smoking rear tire problem

Chevy 2000 Tahoe LT 77,000 Mi. Noticed when stopped at the light smoke coming from behind the rear tire. I was able to drive home with no ...

Asked by tommorrisa about 6 years ago - 1 Answer

1996 Ford Probe problem

Hello everybody. I am new at this so please bear with me. I've got a 96 Probe GT with a M/T and 113k miles. I am trying to replace the ...

Asked by UGAfsuFAN about 6 years ago - 1 Answer

2001 Chevrolet Other problem

I just changed the rear disc brake pads a few days ago. The rear brakes smell hot and steam when they get wet. I greased the caliper pins ...

Asked by draftsman28 about 6 years ago - 0 Answers

2003 Dodge Other problem

We recently had our relatives come for a visit and found that the right front caliper was missing both bolts. they have never had a brake ...

Asked by syberkop about 6 years ago - 1 Answer

1997 Mercury Sable problem

I'm changing the rear disc brakes on a 1997 Merc Sable and cannot get the brake piston to retract in order to give enough room for the new ...

Asked by Steve Luke about 6 years ago - 1 Answer

1991 Jeep Cherokee problem

What type of wrench do i need to take off brake caliper

Asked by ae4191 about 6 years ago - 0 Answers

1993 Jeep Other problem

I have a 93 Grand Cheroke with 150 k on it It's in great shape but when I drive 20 - 25 expressway miles and go to park the car it locks up ...

Asked by Thom about 6 years ago - 2 Answers

1999 Chevrolet Silverado problem

When I engage the 4x4 unit, as long as I drive the truck straight, there is no problem, however, when I make a turn, 45 degrees or more, the...

Asked by tlmccubbin about 6 years ago - 1 Answer

Abs chattering while driving problem

Mitsubishi Montero Limited (not Sport) 2001, 130,000 miles- Upon changing my hub assembly for the second time to solve a whirring noise and ...

Asked by brochureman about 6 years ago - 0 Answers

Brake pads wont fit problem

I just replaced the front rodors on my 1998 two wheel drive 4 cyl. Chev. S-10. The new pads will not fit over the new rotor. The pistons ...

Asked by gmack about 6 years ago - 7 Answers

1979 Ford Other problem

I have a 79 F100 and replaced the brake lines, calipers,pads and rotors. I drained all the old fluid and have a great pedal. The brakes are ...

Asked by mjhosler about 6 years ago - 2 Answers

Brakes please help problem

:?:2004 galant w/abs 45000mi have no peadl went to bleed lr-rr-rf- lf. when I got to the left front still no peadL wont pump up still goes ...

Asked by mellefson about 6 years ago - 0 Answers

Brakes grinding problem

2000 Buick Century. 85,000 miles. I had both front rotors and brake pads replaced in October. It's December and the car two days ago started...

Asked by dschwarz about 6 years ago - 3 Answers

Breaks problem

1999 ford mustang 175,00 miles i changed the front breaks and calipers and about an hour later they didnt work when driveing could this ...

Asked by pinkfloydfan311 about 6 years ago - 1 Answer

1999 Dodge Ram problem

Ok, So the other day I installed new Rotors and Brake pads on my front end. I did not remove the Calipers. My problem is this... ...

Asked by Bkline3 about 6 years ago - 1 Answer

1998 Chevrolet Cavalier problem

My brakes dont work all the time. just before my car comes to a stop..for example, when i am parking..as i slow down i push the brake pedal ...

Asked by ortica about 6 years ago - 4 Answers

Rotors problem

I have a 1997 ford f-150 truck with 75,000 miles. When driving, the truck shakes when I apply the brakes. I replaced the brake pads and had ...

Asked by heavner about 6 years ago - 2 Answers

1998 Chevrolet Blazer problem

I pulled on the wire for my ABS sensor too hard as evidenced by the light staying on now. This was done while removing the passenger side ...

Asked by mswillia1 about 6 years ago - 1 Answer

2002 Chevrolet Cavalier problem

I recently replaced the brakes on the front of my 02 cavalier at about 39K mi. (new pads and turned the warped rotors until flat again). I ...

Asked by Mikehay about 6 years ago - 0 Answers

Brakes problem

I have a '99 Nissan Sentra 99,000 miles. I recently changed the brake pads and rotors (front) and there is a grinding sound coming from the...

Asked by falconplumber about 6 years ago - 3 Answers

Monte carlo brakes. please help. problem

I have a 98 Monte Carlo Z34 and just replaced the rear pads. The piston in the caliper on the rear left brake came out too far when i was ...

Asked by sanewithinsanity about 6 years ago - 1 Answer

1996 Ford Taurus problem

1996 Ford Taurus SL 120,000 miles. Hi I was driving about 45 miles per hour and had to slam on my brakes very hard and very quickly. The ...

Asked by juliel about 6 years ago - 1 Answer

Honda crx rear calipers - please help problem

Hi there, here is a problem: rear calipers are screw-type, so there is secondary and primary piston..When assembling calipers, using a ...

Asked by strajo about 6 years ago - 1 Answer

1993 Dodge Shadow problem

Hello. I am hoping someone can help me out with my 93 dodge shadow. It has 145k miles with a recently rebuilt engine, new heads and ...

Asked by sheephater321 about 6 years ago - 1 Answer

2005 All Other Makes All Other Models problem

I would like to know how to compress the caliper i have it off the roter and the new brakes on but the caliper will not go in go in

Asked by chris8999 about 6 years ago - 1 Answer

Mustang rear brake pads problem

Have a 2002 Mustang, 45,000 miles. 3.8 (I think)Changed front pads ok but could not compress the piston on the rear caliper. I actually ...

Asked by johnt about 6 years ago - 4 Answers

Related Topics