SPONSORED LINKS

1991 Toyota MR2

Tiny
JOEYBUSHMAN
  • MEMBER
  • 1991 TOYOTA MR2
  • 4 CYL
  • 2WD
  • MANUAL
  • 150,000 MILES
My mr2 want to stall when I press the brake almost like its taking all the power it happens when im stoped when im going when I press the brake the hedlights dim and the the voltage meter drops
Saturday, January 9th, 2010 AT 8:26 PM

1 Reply

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Hi joeybushman,

Thank you for the donation.

A Mass Air flow meter is used for your vehicle and if there are any vacumn leakages between the MAF and manifold, the idling speed would tend to drop and act as if it wants to stall.

As problem is affected by the brakes, check the idling syatem and idles speed adjustment first. Next test the brake booster for vacumn leakages when brakes are applied.

Does the brake pedal seem rather stiff if you depress the pedal the second time in quick succession? If yes, there should be some leakage.

With vehicle stopped, depress the brake pedal slowly and note if the idling speed drops.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, January 10th, 2010 AT 8:08 AM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...
VIEW MORE

Sponsored links