Serpentine belt diagram

Tiny
WANDAKAY EVANS
  • MEMBER
  • 2012 CHEVROLET IMPALA
  • 3.6L
  • V6
  • AUTOMATIC
  • 67,000 MILES
I need diagram for serpentine belt replacement
Do you
have the same problem?
Yes
No
Saturday, March 18th, 2017 AT 10:22 AM

23 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,606 POSTS
That should be on the panel above radiator most cars have that unless someone stripped it off see pic for diagram. Tensioner should be replaced as well if replacing belt. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Was this
answer
helpful?
Yes
No
-1
Saturday, March 18th, 2017 AT 2:07 PM
Tiny
RODNEY FRANCOIS
  • MEMBER
  • 1 POST
Do I torque the tensioner towards the front or back of the car to loosen the serpentine belt?
Was this
answer
helpful?
Yes
No
+6
Wednesday, June 21st, 2017 AT 4:26 PM
Tiny
HMAC300
  • MECHANIC
  • 48,606 POSTS
Which ever way is away from the belt over the pulley
Was this
answer
helpful?
Yes
No
+1
Wednesday, June 21st, 2017 AT 5:55 PM
Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,544 POSTS
  • 2007 CHEVROLET IMPALA
  • 105,000 MILES
I had the rack and pinion replaced and the power steering pump, belt tension, serpentine belt, power steering line replaced my car is making a whining noise can you give me the belt diagrams so I can replace it?
Was this
answer
helpful?
Yes
No
+1
Thursday, June 18th, 2020 AT 1:34 PM (Merged)
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Hello,

Here is a guide to help you change the serpentine belt out with the routing diagrams in the diagrams for your car below.

https://www.2carpros.com/articles/replace-serpentine-belt

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Was this
answer
helpful?
Yes
No
+1
Thursday, June 18th, 2020 AT 1:34 PM (Merged)
Tiny
WRENCH35
  • MEMBER
  • 1 POST
  • 2006 CHEVROLET IMPALA
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 76,000 MILES
What is the belt serpentine belt routing for an 06 impala with a 3.5 liter engine?
Was this
answer
helpful?
Yes
No
+2
Thursday, June 18th, 2020 AT 2:12 PM (Merged)
Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
Hello

3.5L Engine - 5.3 Liter is in the diagrams below


https://www.2carpros.com/forum/automotive_pictures/261618_GraphicCAS5A2TH_1.jpg



Install by starting at the generator, route belt around all pulleys except for tensioner. Rotate belt tensioner clockwise in order to release the spring tension. Install drive belt around the tensioner.

This guide can help as well.

https://www.2carpros.com/articles/replace-serpentine-belt

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Cheers
Was this
answer
helpful?
Yes
No
+4
Thursday, June 18th, 2020 AT 2:12 PM (Merged)
Tiny
MDYKES3948
  • MEMBER
  • 4 POSTS
  • 2006 CHEVROLET IMPALA
I need to change the belt on my car becasue I can see cracks. Can I get a diagram to put the belt back on? 3.5 engine Thanks! Love this site.
Was this
answer
helpful?
Yes
No
Thursday, June 18th, 2020 AT 2:12 PM (Merged)
Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
Here is a guide that will give you an idea on what you are in for when changing the belt:

https://www.2carpros.com/articles/replace-serpentine-belt

Here is the diagram (below).

Please let us know if you need anything else to get the problem fixed.

Cheers
Was this
answer
helpful?
Yes
No
+1
Thursday, June 18th, 2020 AT 2:12 PM (Merged)
Tiny
JIS001
  • MECHANIC
  • 3,408 POSTS
I was looking at both 3.5L and 3.9L and looks to me like they are the same? Here is diagram for a 3.5L.

And this one is 3.9L.


https://www.2carpros.com/forum/automotive_pictures/337695_39L_1.jpg



Hope this helps you?
Was this
answer
helpful?
Yes
No
+6
Thursday, June 18th, 2020 AT 2:12 PM (Merged)
Tiny
BEASLE1
  • MEMBER
  • 1 POST
  • 2006 CHEVROLET IMPALA
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 60,000 MILES
I have a 2006 chevy impala and I need a serpentine belt diagram
Was this
answer
helpful?
Yes
No
+1
Thursday, June 18th, 2020 AT 2:12 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
There you go.
Was this
answer
helpful?
Yes
No
-3
Thursday, June 18th, 2020 AT 2:12 PM (Merged)
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Hope this helps.
Was this
answer
helpful?
Yes
No
-1
Thursday, June 18th, 2020 AT 2:12 PM (Merged)
Tiny
TSHORT82392
  • MEMBER
  • 1 POST
  • 2006 CHEVROLET IMPALA
  • 5.3L
  • V8
  • FWD
  • AUTOMATIC
  • 73,000 MILES
I need to replace my alternator, but I want to replace my serpentine belt also, I just need the diagram for it, as I cannot find it anywhere.
Was this
answer
helpful?
Yes
No
Thursday, June 18th, 2020 AT 2:12 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,606 POSTS
If you go to repair and service then diagrams it is right there. However, if you are replacing belt replace tension-er as well as it is worn out too. See picture.
Was this
answer
helpful?
Yes
No
+13
Thursday, June 18th, 2020 AT 2:12 PM (Merged)
Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,544 POSTS
  • 2006 CHEVROLET IMPALA
  • 122,900 MILES
I need to find the diagram to replace my serpentine belt
Was this
answer
helpful?
Yes
No
Friday, June 19th, 2020 AT 10:22 AM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,606 POSTS
It's on the site here when you first sign in look to the left under belt diagrams
Was this
answer
helpful?
Yes
No
Friday, June 19th, 2020 AT 10:22 AM (Merged)
Tiny
DARKMAN13
  • MEMBER
  • 1 POST
  • 2006 CHEVROLET IMPALA
  • 5.3L
  • V8
  • 2WD
  • AUTOMATIC
  • 133,265 MILES
My serpentine belt broke and I was wondering where is the tensioned located at and what tool I need to loosen it up, is there a video that would show me.
Was this
answer
helpful?
Yes
No
Friday, June 19th, 2020 AT 10:22 AM (Merged)
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,005 POSTS
This guide should help walk you through the steps.

https://www.2carpros.com/articles/replace-serpentine-belt

It is a different model GM vehicle, but should help.
Was this
answer
helpful?
Yes
No
Friday, June 19th, 2020 AT 10:22 AM (Merged)
Tiny
SCOTTX3
  • MEMBER
  • 1 POST
  • 2006 CHEVROLET IMPALA
  • V8
  • FWD
  • AUTOMATIC
  • 100 MILES
I have the SS model with a 5.3 liter engine. I am in need of a serpentine belt diagram since Chevrolet failed to put on on this vehicle.

What tool and size of the socket I need to perform this duty?

Love this site!
Was this
answer
helpful?
Yes
No
+1
Friday, June 19th, 2020 AT 10:23 AM (Merged)

Please login or register to post a reply.

Sponsored links