CAR STALLING WHEN BRAKING
I have a 1995 Saturn SL2 and everytime I go to come to a stop at a light, it stalls. I have changed the throttle position sensor, the ECTS, and the idle control sensor. We checked the connector and it is fine. The temperature gauge doesn't work either even after changing ECTS. What can be the problem? Please help.
May 23, 2007.
May 23, 2007.
Check out the related content below while we wait for the question to be answered by a professional mechanic.
Just wondering what sensors i need to replace.codes as follows.p0135,p0155,p0133.two of the codes say bank 1 sensor 1 the other says bank2 sensor 1.I think bank means driver or ...
2 answers • 2002 Dodge Intrepid • 100,500 miles
Hi hope you can help, this is a general question. 2 wire sensors, crank and cam are referred to as inductive, magnetic, whilst 3 wire sensors are Hall effect. Can a inductive, magnetic ...
3 answers • 2010 All Other Makes All Other Models
I had a rough starting when cold issue. Checked the codes and discovered two codes for a lean condition in both banks. After not finding a vac leak, I replaced the MAF with a ...
2 answers • 2002 Chevrolet Silverado • 170,779 miles
Describe the type sensor of the Knock sensor is on this vehicle and how it should be tested.?
1 answer • 2002 Chrysler 300 • 100 miles